Immediate weight bearing of comminuted supracondylar femur fractures using locked plate fixation.

Comminuted supracondylar femur fractures (AO-OTA 33A3) are commonly treated with locked plates. Weight bearing is generally restricted for 6 to 12 weeks until radiologic evidence exists of sufficient callous to support weight bearing. Recent clinical studies have reported high nonunion rates with distal femur locked plates. In an attempt to induce beneficial motion across the fracture site, some studies have recommended earlier weight bearing. The purpose of the current study was to determine the biomechanical feasibility of an immediate weight-bearing rehabilitation protocol to encourage healing of distal femur fractures treated with lateral locked plate fixation.Sixteen fresh-frozen cadaveric femora were used for this study. A 2.5-cm supracondylar gap osteotomy was made. Ten-hole, 4.5-mm distal femur locking plates were used with a standardized screw configuration that maximized the working length. The specimens were placed in a servohydraulic testing machine and axially loaded (unidirectional) at 1 Hz for up to 200,000 cycles. Failure was defined as 1 cm of deformation of the construct. The staircase method was used to determine the fatigue limit of the construct. The fatigue limit was calculated to be 1329±106 N. No specimen failed through the non-locking diaphyseal screws. Plastic deformation, when present, occurred at the metaphyseal flare of the plate. The fatigue limit of the locked plate constructs equaled 1.9 times body weight for an average 70-kg patient over a simulated 10-week postoperative course. Given that distal femoral loads during gait have been estimated to be more than 2 times body weight, the data from this study do not support immediate full weight bearing. Copyright 2012, SLACK Incorporated.