Literature DB >> 2282909

Cardiac stress in glass bangle workers.

S K Rastogi1, B N Gupta, T Husain, N Mathur.   

Abstract

The cardiac cost of work and recovery pulse rates were evaluated in 38 glass bangle workers (mean age 27.8 years, SD 3.4) exposed to radiant heat (46.2 degrees C, SD 5.1) and high ambient temperature (38.2 degrees C, SD 3.4) for a mean period of 11.0 years, SD 3.5 in the glass bangle industry. A reference group of 15 controls (mean age 27.0 years, SD 3.5 unexposed to occupational heat stress served as a comparison. The results showed that the pulse rate increased from a mean basal value of 80.0 beats.min-1, SD 2.7 to 113.2 beats.min-1, SD 11.4 in the exposed workers while in the controls the increase was negligible. Thus the cardiac cost of work was found to be 33.2 beats.min-1, SD 11.1 in the exposed group which was significantly higher (P less than 0.001) than 7.8 beats.min-1, SD 4.2 observed in the control group. Among the exposed workers, 'belanias', who were engaged in the strenuous job of manually rotating the iron roller in the Belan furnace so that the molten glass could be wound in a spiral form, showed the maximum increase in the pulse rate (42.0 beats.min-1, SD 7.5) over the work-shift followed by 'muthias' (31.1 beats.min-1, SD 4.0) who were engaged in removing the glass spirals from the Belan furnace. However, wireman ('tarkashs'), who were engaged in the highly skilled job of making very fine threads of molten glass with the help of an iron roller, showed the smallest increase (19.5 beats.min-1, SD 3.4) in pulse rate over the work-shift.(ABSTRACT TRUNCATED AT 250 WORDS)

Entities:  

Mesh:

Year:  1990        PMID: 2282909     DOI: 10.1007/bf00357608

Source DB:  PubMed          Journal:  Eur J Appl Physiol Occup Physiol        ISSN: 0301-5548


  10 in total

1.  The physiological basis of rest pauses in heavy work.

Authors:  E A MULLER
Journal:  Q J Exp Physiol Cogn Med Sci       Date:  1953

2.  Fatigue; measurement and reduction.

Authors:  L BROUHA
Journal:  Ind Med Surg       Date:  1953-12

3.  A formula to estimate the approximate surface area if height and weight be known. 1916.

Authors:  D Du Bois; E F Du Bois
Journal:  Nutrition       Date:  1989 Sep-Oct       Impact factor: 4.008

4.  Applicability of the WBGT index of heat stress to work situations in India.

Authors:  D J Parikh; C B Pandya; N L Ramanathan
Journal:  Indian J Med Res       Date:  1976-03       Impact factor: 2.375

5.  Physiological responses to thermal stress in a glass bangle factory.

Authors:  S K Rastogi; B N Gupta; T Husain; N Mathur
Journal:  J Soc Occup Med       Date:  1988

6.  Health factors involved in working under conditions of heat stress. Report of a WHO Scientific Group.

Authors: 
Journal:  World Health Organ Tech Rep Ser       Date:  1969

7.  Cardiovascular responses to sustained high skin temperature in resting man.

Authors:  L B Rowell; G L Brengelmann; J A Murray
Journal:  J Appl Physiol       Date:  1969-11       Impact factor: 3.531

8.  Cardiorespiratory strain in jobs that require respiratory protection.

Authors:  V Louhevaara; T Tuomi; J Smolander; O Korhonen; A Tossavainen; J Jaakkola
Journal:  Int Arch Occup Environ Health       Date:  1985       Impact factor: 3.015

9.  Evaluation of heat stress in a hot workshop by physiological measurements.

Authors:  F H Fuller; P E Smith
Journal:  Am Ind Hyg Assoc J       Date:  1981-01

10.  A simple, valid step test for estimating maximal oxygen uptake in epidemiologic studies.

Authors:  S F Siconolfi; C E Garber; T M Lasater; R A Carleton
Journal:  Am J Epidemiol       Date:  1985-03       Impact factor: 4.897

  10 in total
  1 in total

1.  The Effect of High Temperature on Cardiovascular Autonomic Function Tests in Steel Plant Furnace Worker.

Authors:  Sachin B Rathod; Smita R Sorte; Sandeep Patel
Journal:  Indian J Occup Environ Med       Date:  2021-07-09
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.