Literature DB >> 22783965

Periodic bicontinuous composites for high specific energy absorption.

Jae-Hwang Lee1, Lifeng Wang, Mary C Boyce, Edwin L Thomas.   

Abstract

We report on the mechanical behavior of an interpenetrating carbon/epoxy periodic submicrometer-scale bicontinuous composite material fabricated following the design principles deduced from biological composites. Using microscopic uniaxial compressive tests, the specific energy absorption is quantitatively evaluated and compared with the epoxy/air and carbon/air precursors. The carbon/epoxy material demonstrates extremely high specific energy absorption up to 720 kJ/kg and shear-dominant interphase interactions from the interlocked hard (carbon) and soft (epoxy) phases. Such bicontinuous nanocomposites are a new type of structural metamaterial with designed cell topology and mechanical anisotropy. Their inherent small length scale can play a critical role in prohibiting segregated mechanical responses leading to flaw tolerance.

Entities:  

Year:  2012        PMID: 22783965     DOI: 10.1021/nl302234f

Source DB:  PubMed          Journal:  Nano Lett        ISSN: 1530-6984            Impact factor:   11.189


  9 in total

1.  Approaching theoretical strength in glassy carbon nanolattices.

Authors:  J Bauer; A Schroer; R Schwaiger; O Kraft
Journal:  Nat Mater       Date:  2016-02-01       Impact factor: 43.841

2.  On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures.

Authors:  Mingyang Zhang; Ning Zhao; Qin Yu; Zengqian Liu; Ruitao Qu; Jian Zhang; Shujun Li; Dechun Ren; Filippo Berto; Zhefeng Zhang; Robert O Ritchie
Journal:  Nat Commun       Date:  2022-06-06       Impact factor: 17.694

3.  Mesoscale networks and corresponding transitions from self-assembly of block copolymers.

Authors:  Cheng-Yen Chang; Gkreti-Maria Manesi; Chih-Ying Yang; Yu-Chueh Hung; Kai-Chieh Yang; Po-Ting Chiu; Apostolos Avgeropoulos; Rong-Ming Ho
Journal:  Proc Natl Acad Sci U S A       Date:  2021-03-16       Impact factor: 12.779

4.  Origami lattices with free-form surface ornaments.

Authors:  Shahram Janbaz; Niels Noordzij; Dwisetya S Widyaratih; Cornelis W Hagen; Lidy E Fratila-Apachitei; Amir A Zadpoor
Journal:  Sci Adv       Date:  2017-11-29       Impact factor: 14.136

5.  Large-Area Nanolattice Film with Enhanced Modulus, Hardness, and Energy Dissipation.

Authors:  Abhijeet Bagal; Xu A Zhang; Rahnuma Shahrin; Erinn C Dandley; Junjie Zhao; Felipe R Poblete; Christopher J Oldham; Yong Zhu; Gregory N Parsons; Christopher Bobko; Chih-Hao Chang
Journal:  Sci Rep       Date:  2017-08-22       Impact factor: 4.379

6.  Harnessing out-of-plane deformation to design 3D architected lattice metamaterials with tunable Poisson's ratio.

Authors:  Tiantian Li; Xiaoyi Hu; Yanyu Chen; Lifeng Wang
Journal:  Sci Rep       Date:  2017-08-21       Impact factor: 4.379

7.  Molecular-Weight-Dependent Interplay of Brittle-to-Ductile Transition in High-Strain-Rate Cold Spray Deposition of Glassy Polymers.

Authors:  Anuraag Gangineri Padmanaban; Tristan W Bacha; Jeeva Muthulingam; Francis M Haas; Joseph F Stanzione; Behrad Koohbor; Jae-Hwang Lee
Journal:  ACS Omega       Date:  2022-07-11

8.  Introduction of Graphene/h-BN Metamaterial as Neutron Radiation Shielding by Implementing Monte Carlo Simulation.

Authors:  Marzieh Hassanpour; Mehdi Hassanpour; Simin Faghihi; Saeedeh Khezripour; Mohammadreza Rezaie; Parvin Dehghanipour; Mohammad Rashed Iqbal Faruque; Mayeen Uddin Khandaker
Journal:  Materials (Basel)       Date:  2022-09-26       Impact factor: 3.748

9.  Damage-tolerant 3D-printed ceramics via conformal coating.

Authors:  Seyed Mohammad Sajadi; Lívia Vásárhelyi; Reza Mousavi; Amir Hossein Rahmati; Zoltán Kónya; Ákos Kukovecz; Taib Arif; Tobin Filleter; Robert Vajtai; Peter Boul; Zhenqian Pang; Teng Li; Chandra Sekhar Tiwary; Muhammad M Rahman; Pulickel M Ajayan
Journal:  Sci Adv       Date:  2021-07-07       Impact factor: 14.136

  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.