Literature DB >> 22749448

Cartilage-like mechanical properties of poly (ethylene glycol)-diacrylate hydrogels.

Quynhhoa T Nguyen1, Yongsung Hwang, Albert C Chen, Shyni Varghese, Robert L Sah.   

Abstract

Hydrogels prepared from poly-(ethylene glycol) (PEG) have been used in a variety of studies of cartilage tissue engineering. Such hydrogels may also be useful as a tunable mechanical material for cartilage repair. Previous studies have characterized the chemical and mechanical properties of PEG-based hydrogels, as modulated by precursor molecular weight and concentration. Cartilage mechanical properties vary substantially, with maturation, with depth from the articular surface, in health and disease, and in compression and tension. We hypothesized that PEG hydrogels could mimic a broad range of the compressive and tensile mechanical properties of articular cartilage. The objective of this study was to characterize the mechanical properties of PEG hydrogels over a broad range and with reference to articular cartilage. In particular, we assessed the effects of PEG precursor molecular weight (508 Da, 3.4 kDa, 6 kDa, and 10 kDa) and concentration (10-40%) on swelling property, equilibrium confined compressive modulus (H(A0)), compressive dynamic stiffness, and hydraulic permeability (k(p0)) of PEG hydrogels in static/dynamic confined compression tests, and equilibrium tensile modulus (E(ten)) in tension tests. As molecular weight of PEG decreased and concentration increased, hydrogels exhibited a decrease in swelling ratio (31.5-2.2), an increase in H(A0) (0.01-2.46 MPa) and E(ten) (0.02-3.5 MPa), an increase in dynamic compressive stiffness (0.055-42.9 MPa), and a decrease in k(p0) (1.2 × 10(-15) to 8.5 × 10(-15) m(2)/(Pa s)). The frequency-dependence of dynamic compressive stiffness amplitude and phase, as well as the strain-dependence of permeability, were typical of the time- and strain-dependent mechanical behavior of articular cartilage. H(A0) and E(ten) were positively correlated with the final PEG concentration, accounting for swelling. These results indicate that PEG hydrogels can be prepared to mimic many of the static and dynamic mechanical properties of articular cartilage.
Copyright © 2012 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22749448      PMCID: PMC3572364          DOI: 10.1016/j.biomaterials.2012.06.005

Source DB:  PubMed          Journal:  Biomaterials        ISSN: 0142-9612            Impact factor:   12.479


  43 in total

1.  Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks.

Authors:  J Elisseeff; W McIntosh; K Anseth; S Riley; P Ragan; R Langer
Journal:  J Biomed Mater Res       Date:  2000-08

2.  Controlling the spatial distribution of ECM components in degradable PEG hydrogels for tissue engineering cartilage.

Authors:  Stephanie J Bryant; Kristi S Anseth
Journal:  J Biomed Mater Res A       Date:  2003-01-01       Impact factor: 4.396

3.  Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels.

Authors:  Stephanie J Bryant; Kristi S Anseth
Journal:  J Biomed Mater Res       Date:  2002-01

4.  Compressive properties and function-composition relationships of developing bovine articular cartilage.

Authors:  A K Williamson; A C Chen; R L Sah
Journal:  J Orthop Res       Date:  2001-11       Impact factor: 3.494

5.  Comparative study of the viscoelastic mechanical behavior of agarose and poly(ethylene glycol) hydrogels.

Authors:  Justine J Roberts; Audrey Earnshaw; Virginia L Ferguson; Stephanie J Bryant
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2011-06-28       Impact factor: 3.368

6.  Depth- and strain-dependent mechanical and electromechanical properties of full-thickness bovine articular cartilage in confined compression.

Authors:  A C Chen; W C Bae; R M Schinagl; R L Sah
Journal:  J Biomech       Date:  2001-01       Impact factor: 2.712

7.  Glycosaminoglycan network geometry may contribute to anisotropic hydraulic permeability in cartilage under compression.

Authors:  T M Quinn; P Dierickx; A J Grodzinsky
Journal:  J Biomech       Date:  2001-11       Impact factor: 2.712

8.  Effect of poly(ethylene glycol) molecular weight on tensile and swelling properties of oligo(poly(ethylene glycol) fumarate) hydrogels for cartilage tissue engineering.

Authors:  Johnna S Temenoff; Kyriacos A Athanasiou; Richard G LeBaron; Antonios G Mikos
Journal:  J Biomed Mater Res       Date:  2002-03-05

9.  Tensile mechanical properties of bovine articular cartilage: variations with growth and relationships to collagen network components.

Authors:  Amanda K Williamson; Albert C Chen; Koichi Masuda; Eugene J-M A Thonar; Robert L Sah
Journal:  J Orthop Res       Date:  2003-09       Impact factor: 3.494

10.  Swelling and mechanical behaviors of chemically cross-linked hydrogels of elastin-like polypeptides.

Authors:  Kimberly Trabbic-Carlson; Lori A Setton; Ashutosh Chilkoti
Journal:  Biomacromolecules       Date:  2003 May-Jun       Impact factor: 6.988

View more
  38 in total

Review 1.  Cell-laden hydrogels for osteochondral and cartilage tissue engineering.

Authors:  Jingzhou Yang; Yu Shrike Zhang; Kan Yue; Ali Khademhosseini
Journal:  Acta Biomater       Date:  2017-01-11       Impact factor: 8.947

2.  Time and dose-dependent effects of chondroitinase ABC on growth of engineered cartilage.

Authors:  G D O'Connell; R J Nims; J Green; A D Cigan; G A Ateshian; C T Hung
Journal:  Eur Cell Mater       Date:  2014-04-23       Impact factor: 3.942

3.  Integrating valve-inspired design features into poly(ethylene glycol) hydrogel scaffolds for heart valve tissue engineering.

Authors:  Xing Zhang; Bin Xu; Daniel S Puperi; Aline L Yonezawa; Yan Wu; Hubert Tseng; Maude L Cuchiara; Jennifer L West; K Jane Grande-Allen
Journal:  Acta Biomater       Date:  2014-11-26       Impact factor: 8.947

4.  A Three-Dimensional Chondrocyte-Macrophage Coculture System to Probe Inflammation in Experimental Osteoarthritis.

Authors:  Satyavrata Samavedi; Patricia Diaz-Rodriguez; Joshua D Erndt-Marino; Mariah S Hahn
Journal:  Tissue Eng Part A       Date:  2016-11-18       Impact factor: 3.845

5.  Mechanical viability of a thermoplastic elastomer hydrogel as a soft tissue replacement material.

Authors:  Kristine M Fischenich; Jackson T Lewis; Travis S Bailey; Tammy L Haut Donahue
Journal:  J Mech Behav Biomed Mater       Date:  2018-01-10

6.  Photocrosslinked layered gelatin-chitosan hydrogel with graded compositions for osteochondral defect repair.

Authors:  Fengxuan Han; Xiaoling Yang; Jin Zhao; Yunhui Zhao; Xiaoyan Yuan
Journal:  J Mater Sci Mater Med       Date:  2015-03-19       Impact factor: 3.896

7.  Nanoscale 3D printing of hydrogels for cellular tissue engineering.

Authors:  Shangting You; Jiawen Li; Wei Zhu; Claire Yu; Deqing Mei; Shaochen Chen
Journal:  J Mater Chem B       Date:  2018-03-14       Impact factor: 6.331

8.  Characterization of sequential collagen-poly(ethylene glycol) diacrylate interpenetrating networks and initial assessment of their potential for vascular tissue engineering.

Authors:  Dany J Munoz-Pinto; Andrea Carolina Jimenez-Vergara; Tanmay P Gharat; Mariah S Hahn
Journal:  Biomaterials       Date:  2014-11-27       Impact factor: 12.479

9.  Toward zonally tailored scaffolds for osteochondral differentiation of synovial mesenchymal stem cells.

Authors:  Patricia Diaz-Rodriguez; Josh D Erndt-Marino; Tanmay Gharat; Dany J Munoz Pinto; Satyavrata Samavedi; Robert Bearden; Melissa A Grunlan; W Brian Saunders; Mariah S Hahn
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2018-12-13       Impact factor: 3.368

10.  Spatiotemporal neocartilage growth in matrix-metalloproteinase-sensitive poly(ethylene glycol) hydrogels under dynamic compressive loading: an experimental and computational approach.

Authors:  Margaret C Schneider; Shankar Lalitha Sridhar; Franck J Vernerey; Stephanie J Bryant
Journal:  J Mater Chem B       Date:  2020-04-08       Impact factor: 6.331

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.