Comparative study of different analytical methods for the determination of 238U, 234U, 235U, 230Th and 232Th in NORM samples (Southern Catalonia).

Uranium and thorium isotopes from sludge samples taken from an area of influence of a dicalcium phosphate factory, located close to the Ebro River reservoir in Flix, and from mineral raw materials (coal and phosphate) which were deposited in Tarragona Harbour (Catalonia) have been measured. To do that, several procedures to determine these isotopes have been applied and compared in terms of accuracy, precision and total analysis time. In particular, digestion procedures, such as one based on conventional acidic digestion or another based on the use of microwave digestion, have been tested. Moreover, different radiochemical separation procedures have been applied. In this regard, one method based on liquid-liquid extraction using TBP/Xylene and another based on the use of extraction chromatography using UTEVA resins have been compared. Firstly, the different proposed methods were tested by analyzing a phosphogypsum sediment and a moss-soil sample from two different intercomparison exercises. The microwave digestion - UTEVA method provided the best results (recoveries higher than 82% for uranium and thorium isotopes) and was then applied to the NORM samples. The obtained results showed that the higher uranium and thorium activities values were found in phosphate raw material and in the more superficial samples located in sludge sediments next to the dicalcium phosphate factory.