Literature DB >> 22695143

Comparative study of organosolv lignin extracted from prairie cordgrass, switchgrass and corn stover.

Iwona Cybulska1, Grzegorz Brudecki, Kurt Rosentrater, James L Julson, Hanwu Lei.   

Abstract

Lignin extracted from prairie cordgrass, switchgrass, and corn stover (using ethyl acetate-ethanol-water organosolv pretreatment) was analyzed and characterized using several methods. These methods included analysis of purity (by determination of Klason lignin, carbohydrate, and ash contents), solubility (with several organic solvents), phenolic group analysis (ultraviolet ionization difference spectra, and nitrobenzene oxidation), and general functional group analysis (by (1)H NMR). Results showed that all the examined lignin samples were relatively pure (contained over 50% Klason lignin, less than 5% carbohydrate contamination, and less than 3% ash), but switchgrass-derived lignin was observed to be the purest. All the lignins were found to contain high amounts of phenolic groups, while switchgrass-derived lignin was the most phenolic, according to the ionization difference spectra. Nitrobenzene oxidation revealed that all the lignin samples contained available guaiacyl units in high amounts.
Copyright © 2012 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22695143     DOI: 10.1016/j.biortech.2012.05.073

Source DB:  PubMed          Journal:  Bioresour Technol        ISSN: 0960-8524            Impact factor:   9.642


  5 in total

1.  High Purity and Low Molecular Weight Lignin Nano-Particles Extracted from Acid-Assisted MIBK Pretreatment.

Authors:  Qilin Zhang; Haichao Li; Zongwei Guo; Feng Xu
Journal:  Polymers (Basel)       Date:  2020-02-08       Impact factor: 4.329

Review 2.  A Critical Review on Wood-Based Polymer Composites: Processing, Properties, and Prospects.

Authors:  Manickam Ramesh; Lakshminarasimhan Rajeshkumar; Ganesan Sasikala; Devarajan Balaji; Arunachalam Saravanakumar; Venkateswaran Bhuvaneswari; Ramasamy Bhoopathi
Journal:  Polymers (Basel)       Date:  2022-01-31       Impact factor: 4.329

3.  Fractionation and characterization of lignin from sugarcane bagasse using a sulfuric acid catalyzed solvothermal process.

Authors:  Saksit Imman; Punjarat Khongchamnan; Wanwitoo Wanmolee; Navadol Laosiripojana; Torpong Kreetachat; Chainarong Sakulthaew; Chanat Chokejaroenrat; Nopparat Suriyachai
Journal:  RSC Adv       Date:  2021-08-05       Impact factor: 4.036

4.  High-strength lignin-based carbon fibers via a low-energy method.

Authors:  Zhong Dai; Xiaojuan Shi; Huan Liu; Haiming Li; Ying Han; Jinghui Zhou
Journal:  RSC Adv       Date:  2018-01-02       Impact factor: 3.361

Review 5.  Conversion of lignocellulosic biomass to nanocellulose: structure and chemical process.

Authors:  H V Lee; S B A Hamid; S K Zain
Journal:  ScientificWorldJournal       Date:  2014-08-27
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.