Literature DB >> 22565983

Treatment of industrial wastewater containing Congo Red and Naphthol Green B using low-cost adsorbent.

M F Attallah1, I M Ahmed, Mostafa M Hamed.   

Abstract

The present work investigates the potential use of metal hydroxides sludge (MHS) generated from hot dipping galvanizing plant for adsorption of Congo Red and Naphthol Green B dyes from aqueous solutions. Characterization of MHS included infrared and X-ray fluorescence analysis. The effect of shaking time, initial dye concentration, temperature, adsorbent dosage and pH has been investigated. The results of adsorption experiments indicate that the maximum capacity of Congo Red and Naphthol Green B dyes at equilibrium (q(e)) and percentage of removal at pH 6 are 40 mg/g, 93 %, and 10 mg/g, 52 %, respectively. Some kinetic models were used to illustrate the adsorption process of Congo Red and Naphthol Green B dyes using MHS waste. Thermodynamic parameters such as (ΔG, ΔS, and ΔH) were also determined.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22565983     DOI: 10.1007/s11356-012-0947-4

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  33 in total

Review 1.  Microbial decolourisation and degradation of textile dyes.

Authors:  G McMullan; C Meehan; A Conneely; N Kirby; T Robinson; P Nigam; I M Banat; R Marchant; W F Smyth
Journal:  Appl Microbiol Biotechnol       Date:  2001-07       Impact factor: 4.813

2.  Photochemical degradation of the hazardous dye Safranin-T using TiO2 catalyst.

Authors:  V K Gupta; Rajeev Jain; Alok Mittal; Megha Mathur; Shalini Sikarwar
Journal:  J Colloid Interface Sci       Date:  2007-02-15       Impact factor: 8.128

3.  Defluoridation of wastewaters using waste carbon slurry.

Authors:  Vinod Kumar Gupta; Imran Ali; Vipin Kumar Saini
Journal:  Water Res       Date:  2007-05-08       Impact factor: 11.236

4.  Electrochemical removal of the hazardous dye Reactofix Red 3 BFN from industrial effluents.

Authors:  Vinod Kumar Gupta; Rajeev Jain; Shaily Varshney
Journal:  J Colloid Interface Sci       Date:  2007-03-30       Impact factor: 8.128

5.  Adsorptive removal of hazardous anionic dye "Congo red" from wastewater using waste materials and recovery by desorption.

Authors:  Alok Mittal; Jyoti Mittal; Arti Malviya; V K Gupta
Journal:  J Colloid Interface Sci       Date:  2009-08-19       Impact factor: 8.128

6.  Removal of the herbicide 2,4-dichlorophenoxyacetate from water to zinc-aluminium-chloride layered double hydroxides.

Authors:  A Legrouri; M Lakraimi; A Barroug; A De Roy; J P Besse
Journal:  Water Res       Date:  2005-09       Impact factor: 11.236

7.  Adsorption behavior of reactive dye in aqueous solution on chemical cross-linked chitosan beads.

Authors:  M S Chiou; H Y Li
Journal:  Chemosphere       Date:  2003-03       Impact factor: 7.086

8.  Equilibrium and kinetic modelling of cadmium(II) biosorption by nonliving algal biomass Oedogonium sp. from aqueous phase.

Authors:  V K Gupta; A Rastogi
Journal:  J Hazard Mater       Date:  2007-09-08       Impact factor: 10.588

9.  Waste metal hydroxide sludge as adsorbent for a reactive dye.

Authors:  Sílvia C R Santos; Vítor J P Vílar; Rui A R Boaventura
Journal:  J Hazard Mater       Date:  2007-09-18       Impact factor: 10.588

10.  Nickel-iron layered double hydroxide (LDH): textural properties upon hydrothermal treatments and application on dye sorption.

Authors:  Fatiha Boukraa Djellal Saiah; Bao-Lian Su; Nourredine Bettahar
Journal:  J Hazard Mater       Date:  2008-10-15       Impact factor: 10.588

View more
  5 in total

1.  Adsorption studies on the removal of COD and BOD from treated sewage using activated carbon prepared from date palm waste.

Authors:  Abd ElAziz A Nayl; Reda A Elkhashab; Tamer El Malah; Sobhy M Yakout; Mohamed A El-Khateeb; Mahmoud M S Ali; Hazim M Ali
Journal:  Environ Sci Pollut Res Int       Date:  2017-08-10       Impact factor: 4.223

2.  Sorption and desorption studies of a reactive azo dye on effective disposal of redundant material.

Authors:  Abuzer Çelekli; Hüseyin Bozkurt
Journal:  Environ Sci Pollut Res Int       Date:  2013-01-04       Impact factor: 4.223

Review 3.  Adsorptive amputation of hazardous azo dye Congo red from wastewater: a critical review.

Authors:  Nirav P Raval; Prapti U Shah; Nisha K Shah
Journal:  Environ Sci Pollut Res Int       Date:  2016-06-02       Impact factor: 4.223

4.  Carbon nanotube impregnated anthracite (An/CNT) as a superior sorbent for azo dye removal.

Authors:  Fathy M Mohamed; Zhaohui Li; Ahmed M Zayed
Journal:  RSC Adv       Date:  2020-07-07       Impact factor: 4.036

5.  Eco-friendly adsorbents based on abietic acid, boswellic acid, and chitosan/magnetite for removing waste oil from the surface of the water.

Authors:  Mohamed Fekry; Salwa M Elmesallamy; Nasser R Abd El-Rahman; Mahmoud Bekhit; Hend Alaidy Elsaied
Journal:  Environ Sci Pollut Res Int       Date:  2022-04-26       Impact factor: 5.190

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.