The microbiology of metalworking fluids.

Metalworking fluids (MWFs) are complex mixtures of chemicals and are indispensable materials in industry. They are used as cooling and lubricating agents in different machining process such as grinding, milling, and cutting. The quality of MWFs is affected by physical, chemical, and microbial contaminates. In particular, MWFs are highly vulnerable to microbial contamination, which may act both as potential pathogens and deteriorgens. Microbial contamination is of major concern due to potential health hazards such as skin dermatitis and hypersensitivity pneumonitis. The contaminated MWFs can exhibit high degrees of microbial loading, ranging from 10(4) to 10(10) colony-forming units (CFU)/ml. Wide varieties of microorganisms are reported to colonize MWFs. Traditional culturing techniques are not only laborious and time consuming but also underestimate the actual distribution of the microorganisms present in the contaminated MWFs. Therefore, rapid molecular methods such as real-time PCR and fluorescent in situ hybridization are implemented to monitor the microbial load. In industry, biocides are presently used to control microbial contamination. However, it has its own disadvantages and therefore, in recent years, alternative methods such as UV irradiation were evaluated to reduce microbial contamination in MWFs. Microbes inhabiting the MWF are also capable of forming biofilm which is detrimental to the MWF system. Biofilm is resistant to common disinfectant methods, and thus further research and development is required to effectively control its formation within MWF systems. This review is intended to discuss the overall microbiological aspects of MWF.