BACKGROUND: Most of the materials (casts, impressions, etc.) that are sent to the dental laboratories show the presence of numerous pathogenic microorganisms. All the spray disinfectants are not equally effective against these microorganisms. AIMS AND OBJECTIVES: The aim was to compare the effectiveness of different spray disinfectants on irreversible hydrocolloid impressions and to find out the most effective dilution, contact time, and effect against each microorganism studied. MATERIALS AND METHODS: The effects of four spray disinfectants, 5.25% sodium hypochlorite, 0.525% sodium hypochlorite, 1:213 (1 part in 213 parts of water) povidone iodine, and 2% glutaraldehyde along with control (distilled water) on irreversible hydrocolloid impressions contaminated with Staphylococcus aureus, Bacillus subtilis and Streptococcus viridans were studied. RESULTS: Sodium hypochlorite, 5.25%, showed 1-min exposure time which was able to effect a 4 log 10 reduction in bacterial counts against S. aureus and S. viridans followed by 0.525% sodium hypochlorite and 2% glutaraldehyde for 10 min. None were able to effect a 4 log10 reduction against B. subtilis. CONCLUSION: Sodium hypochlorite with a concentration of 5.25% was the most effective disinfectant and required the shortest contact time (1 min). Not all ADA-approved concentrations of surface disinfectants work equally well on irreversible hydrocolloid impression materials.
BACKGROUND: Most of the materials (casts, impressions, etc.) that are sent to the dental laboratories show the presence of numerous pathogenic microorganisms. All the spray disinfectants are not equally effective against these microorganisms. AIMS AND OBJECTIVES: The aim was to compare the effectiveness of different spray disinfectants on irreversible hydrocolloid impressions and to find out the most effective dilution, contact time, and effect against each microorganism studied. MATERIALS AND METHODS: The effects of four spray disinfectants, 5.25% sodium hypochlorite, 0.525% sodium hypochlorite, 1:213 (1 part in 213 parts of water) povidone iodine, and 2% glutaraldehyde along with control (distilled water) on irreversible hydrocolloid impressions contaminated with Staphylococcus aureus, Bacillus subtilis and Streptococcus viridans were studied. RESULTS:Sodium hypochlorite, 5.25%, showed 1-min exposure time which was able to effect a 4 log 10 reduction in bacterial counts against S. aureus and S. viridans followed by 0.525% sodium hypochlorite and 2% glutaraldehyde for 10 min. None were able to effect a 4 log10 reduction against B. subtilis. CONCLUSION:Sodium hypochlorite with a concentration of 5.25% was the most effective disinfectant and required the shortest contact time (1 min). Not all ADA-approved concentrations of surface disinfectants work equally well on irreversible hydrocolloid impression materials.
Authors: P K Pal; Suresh S Kamble; Ranjitkumar Rampratap Chaurasia; Vishwajit Rampratap Chaurasia; Samarth Tiwari; Deepak Bansal Journal: J Int Oral Health Date: 2014-06-26
Authors: Rania A Sharif; Khalid M Abdelaziz; Najla M Alshahrani; Fatimah S Almutairi; Mohrah A Alaseri; Hoda L Abouzeid; Mohamed F A Elagib Journal: BMC Oral Health Date: 2021-06-09 Impact factor: 2.757