Minimizing nitrous oxide in biological nutrient removal from municipal wastewater by controlling copper ion concentrations.

In this study, nitrous oxide (N(2)O) production during biological nutrient removal (BNR) from municipal wastewater was reported to be remarkably reduced by controlling copper ion (Cu(2+)) concentration. Firstly, it was observed that the addition of Cu(2+) (10-100 μg/L) reduced N(2)O generation by 54.5-73.2 % and improved total nitrogen removal when synthetic wastewater was treated in an anaerobic-aerobic (with low dissolved oxygen) BNR process. Then, the roles of Cu(2+) were investigated. The activities of nitrite and nitrous oxide reductases were increased by Cu(2+) addition, which accelerated the bio-reductions of both nitrite to nitric oxide (NO (2) (-)  → NO) and nitrous oxide to nitrogen gas (N(2)O → N(2)). The quantitative real-time polymerase chain reaction assay indicated that Cu(2+) addition increased the number of N(2)O reducing denitrifiers. Further investigation showed that more polyhydoxyalkanoates were utilized in the Cu(2+)-added system for denitrification. Finally, the feasibility of reducing N(2)O generation by controlling Cu(2+) was examined in two other BNR processes treating real municipal wastewater. As the Cu(2+) in municipal wastewater is usually below 10 μg/L, according to this study, the supplement of influent Cu(2+) to a concentration of 10-100 μg/L is beneficial to reduce N(2)O emission and improve nitrogen removal when sludge concentration in the BNR system is around 3,200 mg/L.