Literature DB >> 22365847

Permeability analysis of scaffolds for bone tissue engineering.

M R Dias1, P R Fernandes, J M Guedes, S J Hollister.   

Abstract

Porous artificial bone substitutes, especially bone scaffolds coupled with osteobiologics, have been developed as an alternative to the traditional bone grafts. The bone scaffold should have a set of properties to provide mechanical support and simultaneously promote tissue regeneration. Among these properties, scaffold permeability is a determinant factor as it plays a major role in the ability for cells to penetrate the porous media and for nutrients to diffuse. Thus, the aim of this work is to characterize the permeability of the scaffold microstructure, using both computational and experimental methods. Computationally, permeability was estimated by homogenization methods applied to the problem of a fluid flow through a porous media. These homogenized permeability properties are compared with those obtained experimentally. For this purpose a simple experimental setup was used to test scaffolds built using Solid Free Form techniques. The obtained results show a linear correlation between the computational and the experimental permeability. Also, this study showed that permeability encompasses the influence of both porosity and pore size on mass transport, thus indicating its importance as a design parameter. This work indicates that the mathematical approach used to determine permeability may be useful as a scaffold design tool. Copyright Â
© 2012 Elsevier Ltd. All rights reserved.

Mesh:

Substances:

Year:  2012        PMID: 22365847     DOI: 10.1016/j.jbiomech.2012.01.019

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  9 in total

1.  Selective Laser Melting Fabrication of Porous Ti6Al4V Scaffolds With Triply Periodic Minimal Surface Architectures: Structural Features, Cytocompatibility, and Osteogenesis.

Authors:  Jia Lv; Wenxuan Jin; Wenhao Liu; Xiuyu Qin; Yi Feng; Junjun Bai; Zhuangzhuang Wu; Jian Li
Journal:  Front Bioeng Biotechnol       Date:  2022-05-26

2.  Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties.

Authors:  Seyed Mohammad Ahmadi; Saber Amin Yavari; Ruebn Wauthle; Behdad Pouran; Jan Schrooten; Harrie Weinans; Amir A Zadpoor
Journal:  Materials (Basel)       Date:  2015-04-21       Impact factor: 3.623

3.  Computationally designed lattices with tuned properties for tissue engineering using 3D printing.

Authors:  Paul F Egan; Veronica C Gonella; Max Engensperger; Stephen J Ferguson; Kristina Shea
Journal:  PLoS One       Date:  2017-08-10       Impact factor: 3.240

4.  Biomaterials and Tissue Biomechanics: A Match Made in Heaven?

Authors:  Amir A Zadpoor
Journal:  Materials (Basel)       Date:  2017-05-13       Impact factor: 3.623

5.  Estimation of anisotropic permeability in trabecular bone based on microCT imaging and pore-scale fluid dynamics simulations.

Authors:  C Daish; R Blanchard; K Gulati; D Losic; D Findlay; D J E Harvie; P Pivonka
Journal:  Bone Rep       Date:  2016-12-16

6.  Analysis of Mechanical Properties and Permeability of Trabecular-Like Porous Scaffold by Additive Manufacturing.

Authors:  Long Chao; Chen Jiao; Huixin Liang; Deqiao Xie; Lida Shen; Zhidong Liu
Journal:  Front Bioeng Biotechnol       Date:  2021-12-21

7.  On-Growth and In-Growth Osseointegration Enhancement in PM Porous Ti-Scaffolds by Two Different Bioactivation Strategies: Alkali Thermochemical Treatment and RGD Peptide Coating.

Authors:  Katrin Steffanie Rappe; Monica Ortiz-Hernandez; Miquel Punset; Meritxell Molmeneu; Albert Barba; Carles Mas-Moruno; Jordi Guillem-Marti; Cristina Caparrós; Elisa Rupérez; José Calero; María-Cristina Manzanares; Javier Gil; Jordi Franch
Journal:  Int J Mol Sci       Date:  2022-02-03       Impact factor: 5.923

Review 8.  Challenges in computational fluid dynamics applications for bone tissue engineering.

Authors:  Tiago Pires; John W C Dunlop; Paulo Rui Fernandes; André P G Castro
Journal:  Proc Math Phys Eng Sci       Date:  2022-01-26       Impact factor: 2.704

Review 9.  The Evolution of Polystyrene as a Cell Culture Material.

Authors:  Max J Lerman; Josephine Lembong; Shin Muramoto; Greg Gillen; John P Fisher
Journal:  Tissue Eng Part B Rev       Date:  2018-10       Impact factor: 6.389

  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.