Mercury vapor pressure of flue gas desulfurization scrubber suspensions: effects of pH level, gypsum, and iron.

Calcium-based scrubbers designed to absorb HCl and SO(2) from flue gases can also remove oxidized mercury. Dissolved mercury halides may have an appreciable partial vapor pressure. Chemical reduction of the dissolved mercury may increase the Hg emission, thereby limiting the coremoval of mercury in the wet scrubbing process. In this paper we evaluate the effects of the pH level, different gypsum qualities, and iron in flue gas desulfurization (FGD) scrubber suspensions. The impact of these parameters on mercury vapor pressure was studied under controlled laboratory conditions in model scrubber suspensions. A major influence is exerted by pH values above 7, considerably amplifying the mercury concentration in the vapor phase above the FGD scrubber suspension. Gypsum also increases the mercury re-emission. Fe(III) decreases and Fe(II) increases the vapor pressure significantly. The consequences of the findings for a reliable coremoval of mercury in FGD scrubbers are discussed. It is shown that there is an increased risk of poor mercury capture in lime-based FGD scrubbers in comparison to limestone FGD scrubbers.