| Literature DB >> 22305601 |
Lifeng Yin1, Yunrong Dai, Junfeng Niu, Yueping Bao, Zhenyao Shen.
Abstract
The [Ni|Cu] microcell was prepared by mixing the Ni(0) and Cu(0) particles. The composition and crystal form were characterized by X-ray diffraction (XRD) and scanning electron microscope. The results evidenced the zero-valence metals Ni and Cu were exposed on the surface of particles mixture. The [Ni|Cu] microcell was employed to decompose chlorophenols in aqueous solution by reductive dechlorination. The dechlorination rates of chlorophenols by [Ni|Cu] were >10 times faster than those by [Fe|Cu], [Zn|Cu], [Sn|Cu], and [Fe|Ni] mixtures under the same conditions. [Ni|Cu] is different from other zero valent metals (ZVMs) in that it performed the best at neutral pH. The main products of chlorophenol dechlorination were cyclohexanol and cyclohexanone. The reduction kinetics was between pseudo zero-order and first-order, depending on the pH, concentration, and temperature. These results, combined with electrochemical analysis, suggested that Ni(0) acted as a reductant and catalyst in dechlorination reaction. The H* corridor mechanism from Ni(0) to Cu(0) was also proposed based on hydrogen spillover. The inhibition on the release of Ni(2+) by adding natural organic matters and adjusting pH was investigated. Copyright ÂEntities:
Mesh:
Substances:
Year: 2012 PMID: 22305601 DOI: 10.1016/j.jhazmat.2012.01.044
Source DB: PubMed Journal: J Hazard Mater ISSN: 0304-3894 Impact factor: 10.588