Literature DB >> 22153605

Black soiling of an architectural limestone during two-year term exposure to urban air in the city of Granada (S Spain).

Maja Urosevic1, Africa Yebra-Rodríguez, Eduardo Sebastián-Pardo, Carolina Cardell.   

Abstract

A two-year term aging test was carried out on a building limestone under different urban conditions in the city of Granada (Southern Spain) to assess its Cultural Heritage sustainability. For this purpose stone tablets were placed vertically at four sites with contrasting local pollution micro-environments and exposure conditions (rain-sheltered and unsheltered). The back (rain-sheltered) and the front (rain-unsheltered) faces of the stone tablets were studied for each site. The soiling process (surface blackening) was monitored through lightness (ΔL*) and chroma changes (ΔC*). Additionally atmospheric particles deposited on the stone surfaces and on PM10 filters during the exposure time were studied through a multianalytical approach including scanning electron microscopy (SEM-EDX), transmission electron microscopy (TEM) and micro-Raman spectroscopy. The identified atmospheric particles (responsible for stone soiling) were mainly soot and soil dust particles; also fly ash and aged salt particles were found. The soiling process was related to surface texture, exposure conditions and proximity to dense traffic streets. On the front faces of all stones, black soiling and surface roughness promoted by differential erosion between micritic and sparitic calcite were noticed. Moreover, it was found that surface roughness enhanced a feedback process that triggers further black soiling. The calculated effective area coverage (EAC) by light absorbing dust ranged from 10.2 to 20.4%, exceeding by far the established value of 2% EAC (limit perceptible to the human eye). Soiling coefficients (SC) were estimated based on square-root and bounded exponential fittings. Estimated black carbon (BC) concentration resulted in relatively similar SC for all studied sites and thus predicts the soiling process better than using particulate matter (PM10) concentration.
Copyright © 2011 Elsevier B.V. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 22153605     DOI: 10.1016/j.scitotenv.2011.11.028

Source DB:  PubMed          Journal:  Sci Total Environ        ISSN: 0048-9697            Impact factor:   7.963


  2 in total

1.  Characterisation of CIME, an experimental chamber for simulating interactions between materials of the cultural heritage and the environment.

Authors:  A Chabas; A Fouqueau; M Attoui; S C Alfaro; A Petitmangin; A Bouilloux; M Saheb; A Coman; T Lombardo; N Grand; P Zapf; R Berardo; M Duranton; R Durand-Jolibois; M Jerome; E Pangui; J J Correia; I Guillot; S Nowak
Journal:  Environ Sci Pollut Res Int       Date:  2015-08-07       Impact factor: 4.223

2.  Chemically and size-resolved particulate matter dry deposition on stone and surrogate surfaces inside and outside the low emission zone of Milan: application of a newly developed "Deposition Box".

Authors:  Luca Ferrero; Marco Casati; Lara Nobili; Luca D'Angelo; Grazia Rovelli; Giorgia Sangiorgi; Cristiana Rizzi; Maria Grazia Perrone; Antonio Sansonetti; Claudia Conti; Ezio Bolzacchini; Elena Bernardi; Ivano Vassura
Journal:  Environ Sci Pollut Res Int       Date:  2018-01-19       Impact factor: 4.223

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.