Literature DB >> 2211742

A new canine model to evaluate the biological response of intramedullary bone to implant materials and surfaces.

J M Spivak1, J L Ricci, N C Blumenthal, H Alexander.   

Abstract

A new canine model utilizing an implantable chamber with multiple bone ingrowth channels has been used to study the response of intramedullary bone to various implant materials and surfaces. The first group of dogs received implants containing channels lined by smooth-surfaced coupons of titanium, titanium alloy, sputter-hydroxyapatite-coated (HA-coated) titanium alloy, and polyethylene. A pattern of early initial bone ingrowth by 2 weeks, becoming maximal at 6 to 12 weeks with remodeling to a more mature lamellar bone, and later resorption by 24 weeks was seen for all test groups, with fibrous tissue interfaces covering the smooth test coupons at all time points. Significantly increased bone ingrowth in the sputter-HA coated group was found only at 6 weeks. The second group of dogs received implants with channels lined by surface-roughened coupons of either titanium or plasma-HA-coated titanium, half of which were also packed with a crystalline-HA grouting at the time of surgery. At both 6 and 12 weeks, bone ingrowth was greatly enhanced by the presence of the plasma-HA coating or the crystalline-HA grouting as compared to the uncoated titanium channels. Histologically, bone was seen to bond directly to the plasma-HA coating and the crystalline-HA grouting. A thin fibrous tissue layer was noted between bone and the titanium in most areas, but evidence of direct bone contact to the metal surface was seen. Mechanical testing in tension of intact coupon-bone-coupon units revealed significant strength of the bone-plasma-HA bond, with failure initiating at the metal-HA interface with forces of 15.3 N at 6 weeks, increasing to 44.8 N at 12 weeks. Plasma-HA-lined channels with crystalline-HA packing required similar forces for failure. No significant adhesion strength was noted for the titanium channels at 6 weeks, and only the crystalline-HA-filled channels displayed measurable strength of the bone-titanium interface at 12 weeks, with a force of 9 N needed for failure.

Entities:  

Mesh:

Substances:

Year:  1990        PMID: 2211742     DOI: 10.1002/jbm.820240902

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  8 in total

1.  Crystallographically engineered, hydrothermally crystallized hydroxyapatite films: an in vitro study of bioactivity.

Authors:  Daniel J Haders; Christian C Kazanecki; David T Denhardt; Richard E Riman
Journal:  J Mater Sci Mater Med       Date:  2010-03-16       Impact factor: 3.896

2.  Molecular structure at the bone-implant interface: a vibrational spectroscopic characterization.

Authors:  M A Walters; N C Blumenthal; Y Leung; Y Wang; J L Ricci; J M Spivak
Journal:  Calcif Tissue Int       Date:  1991-05       Impact factor: 4.333

3.  The influence of residual stress on the shear strength between the bone and plasma-sprayed hydroxyapatite coating.

Authors:  Yung-Chin Yang; Chyun-Yu Yang
Journal:  J Mater Sci Mater Med       Date:  2007-08-15       Impact factor: 3.896

Review 4.  Ceramic and non-ceramic hydroxyapatite as a bone graft material: a brief review.

Authors:  S R Dutta; D Passi; P Singh; A Bhuibhar
Journal:  Ir J Med Sci       Date:  2014-11-27       Impact factor: 1.568

5.  Plasma-sprayed zirconia bond coat as an intermediate layer for hydroxyapatite coating on titanium alloy substrate.

Authors:  Bang-Yen Chou; Edward Chang
Journal:  J Mater Sci Mater Med       Date:  2002-06       Impact factor: 3.896

6.  Crystallization kinetics of sol-gel derived hydroxyapatite thin films.

Authors:  C M Lopatin; V B Pizziconi; T L Alford
Journal:  J Mater Sci Mater Med       Date:  2001-09       Impact factor: 3.896

7.  Microscopic analysis of autograft bone applied at the interface of porous-coated devices in human cancellous bone.

Authors:  A A Hofmann; R D Bloebaum; M H Rubman; K N Bachus; R L Plaster
Journal:  Int Orthop       Date:  1992       Impact factor: 3.075

8.  Promotion of osteogenic differentiation of stem cells and increase of bone-bonding ability in vivo using urease-treated titanium coated with calcium phosphate and gelatin.

Authors:  Zhong-Ming Huang; Yi-Ying Qi; Shao-Hua Du; Gang Feng; Hidero Unuma; Wei-Qi Yan
Journal:  Sci Technol Adv Mater       Date:  2013-09-09       Impact factor: 8.090

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.