Literature DB >> 21935512

Ten-year survival of anterior all-ceramic resin-bonded fixed dental prostheses.

Matthias Kern1, Martin Sasse.   

Abstract

PURPOSE: To evaluate the long-term outcome of all-ceramic resin-bonded fixed dental prostheses (RBFDPs) made with a two-retainer design or a cantilever single-retainer design.
MATERIALS AND METHODS: Overall, 38 anterior RBFDPs were made from a glass-infiltrated alumina ceramic (In-Ceram). Sixteen RBFDPs had a two-retainer design, while 22 RBFDPs had a cantilever single-retainer design. Phosphate monomer containing luting agents were used either after silica coating and silanation or after air-abrasion only. The mean observation time in the two-retainer group was 120.2 months and in the single-retainer group 111.1 months.
RESULTS: No restoration debonded. In the two-retainer group unilateral and bilateral fractures of the connectors occurred. In the case of unilateral fracture, the pontic remained in situ as a cantilever RBFDP for several years. In the single-retainer group, only one FDP fractured and was lost 48 months after insertion. The 10-year survival rate was 73.9% in the two-retainer group and 94.4% in the single-retainer group. When unilateral fracture of a FDP was taken as a criterion for failure, the 10-year survival rate decreased to 67.3% in the two-retainer group.
CONCLUSION: Cantilever all-ceramic RBFDPs are an adequate alternative to two-retainer RBFDPs.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 21935512     DOI: 10.3290/j.jad.a22096

Source DB:  PubMed          Journal:  J Adhes Dent        ISSN: 1461-5185            Impact factor:   2.359


  10 in total

1.  Clinically used adhesive ceramic bonding methods: a survey in 2007, 2011, and in 2015.

Authors:  K Klosa; G Meyer; M Kern
Journal:  Clin Oral Investig       Date:  2015-12-04       Impact factor: 3.573

2.  Are implants more reliable than severely compromised endodontically treated teeth as abutments for zirconia-based FPDs? : In vitro results of long-term preclinical load simulation.

Authors:  M Naumann; C Hohmann; A Happe; F Beuer; R Frankenberger; R Seemann; M Rosentritt
Journal:  Clin Oral Investig       Date:  2012-10-27       Impact factor: 3.573

Review 3.  The Effect of Resin Bonding on Long-Term Success of High-Strength Ceramics.

Authors:  M B Blatz; M Vonderheide; J Conejo
Journal:  J Dent Res       Date:  2017-09-06       Impact factor: 6.116

4.  [Application of single-retainer all-ceramic resin-bonded fixed partial denture in the maintenance of missing incisor gap after orthodontic treatment in adolescents: a case report].

Authors:  Guan-Yi Liu; Li-Yuan Yang; Jing Guo
Journal:  Hua Xi Kou Qiang Yi Xue Za Zhi       Date:  2020-02-01

5.  Replacement of missing lateral incisors with lithium disilicate glass-ceramic veneer-fixed dental prostheses: a clinical report.

Authors:  Sami M Bissasu; Nabil A Al-Houri
Journal:  Clin Case Rep       Date:  2014-05-25

6.  Three-dimensional finite element analysis of anterior two-unit cantilever resin-bonded fixed dental prostheses.

Authors:  Filip Keulemans; Akikazu Shinya; Lippo V J Lassila; Pekka K Vallittu; Cornelis J Kleverlaan; Albert J Feilzer; Roeland J G De Moor
Journal:  ScientificWorldJournal       Date:  2015-03-24

Review 7.  Current status on lithium disilicate and zirconia: a narrative review.

Authors:  Fernando Zarone; Maria Irene Di Mauro; Pietro Ausiello; Gennaro Ruggiero; Roberto Sorrentino
Journal:  BMC Oral Health       Date:  2019-07-04       Impact factor: 2.757

8.  Evaluation Of The Effect Of Different Surface Treatments, Aging And Enzymatic Degradation On Zirconia-Resin Micro-Shear Bond Strength.

Authors:  Jihad Saade; Hasan Skienhe; Hani F Ounsi; Jukka P Matinlinna; Ziad Salameh
Journal:  Clin Cosmet Investig Dent       Date:  2020-01-06

9.  Comparison of Tensile Bond Strength of Fixed-Fixed Versus Cantilever Single- and Double-Abutted Resin-Bonded Bridges Dental Prosthesis.

Authors:  Shweta Narwani; Naveen S Yadav; Puja Hazari; Vrinda Saxena; Abdulrahman H Alzahrani; Ahmed Alamoudi; Bassam Zidane; Nasreen Hassan Mohammed Albar; Ali Robaian; Sushil Kishnani; Kirti Somkuwar; Shilpa Bhandi; Kumar Chandan Srivastava; Deepti Shrivastava; Shankargouda Patil
Journal:  Materials (Basel)       Date:  2022-08-19       Impact factor: 3.748

10.  Influence of the amount of tooth surface preparation on the shear bond strength of zirconia cantilever single-retainer resin-bonded fixed partial denture.

Authors:  Charles-Ellie Sillam; Sibel Cetik; Thai Hoang Ha; Ramin Atash
Journal:  J Adv Prosthodont       Date:  2018-08-17       Impact factor: 1.904

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.