Scalable synthesis of (1-cyclopropyl)cyclopropylamine hydrochloride.

1-Cyclopropylcyclopropanecarboxylic acid (2), which is accessible on a large scale (900 mmol) from 1-bromo-1-cyclopropylcyclopropane (1) in 64% yield (89% on a 12.4 mmol scale), has been subjected to a Curtius degradation employing the Weinstock protocol to furnish the N-Boc-protected (1-cyclopropyl)cyclopropylamine 3 (76%). Deprotection of 3 with hydrogen chloride in diethyl ether gave the (1-cyclopropyl)cyclopropylamine hydrochloride (4·HCl) in 87% yield.

Introduction

Several recent patent applications have stirred an increasing interest in research departments of pharmaceutical and agrochemical companies concerning 1- and 2-substituted 1,1'-bicyclopropyl derivatives. Among them, intermediates containing a (1-cyclopropyl)cyclopropylamine moiety appear to be particularly important and desirable for the preparation of biologically active and pharmacologically relevant compounds. For example, a number of derivatives of (1-cyclopropyl)cyclopropylamine (4) have been found to be useful variously for the treatment of hepatitis C [3-4], as pest control agents [5], as inhibitors of methicillin-resistant Staphylococcus aureus [5], as pesticides, insecticides and acaricides [7-13] and more. This amine has been prepared from cyclopropyl cyanide [3-13] by application of the Szymoniak–Kulinkovich reductive cyclopropanation procedure [14-15]. In our hands, however, this patented protocol [3-13] provided poor yields (15–20%) of impure 4 [16], which had to be purified by conversion to the corresponding tert-butyl carbamate and subsequent column chromatography. Thus, this procedure was not easily scalable to 10–50 g quantities. To meet such demands, we have developed an alternative route to 4 from the easily available corresponding carboxylic acid 2 [17-18] by Curtius degradation [19-20].

Results and Discussion

Preparation of the acid 2 from the known 1-bromo-1-cyclopropylcyclopropane (1) [21-22] according to the published procedure [17] was accomplished on a 100 g scale (Scheme 1). However, the yield of the carboxylation on a scale of 12.4 mmol, 900 mmol and 1400 mmol, was 89, 64 and 62%, respectively. This is associated with the longer reaction time employed on a larger scale, during which the intermediate 1-cyclopropyl-1-lithiocyclopropane may be trapped by the by-product tert-butyl bromide, leading to isobutene by dehydrobromination [23-24]. Indeed, the reaction on a 200 mmol scale, but over a period of 3 h, furnished 2 in 46% yield only. According to previous experience, this undesired side reaction can be suppressed by employing two equivalents of tert-butyllithium [23]. Thus, the yield of 2 may be improved even for large scale preparation.

Scheme 1

Preparation of 1-(cyclopropyl)cyclopropylamine hydrochloride (4·HCl).

Curtius degradation of the acid 2 via the corresponding azide, according to the Weinstock protocol [19-20] as previously employed in different examples [2,25], furnished the N-Boc-protected (1-cyclopropyl)cyclopropylamine 3 in 76% yield. It was essential to carefully dry the solution of the intermediate azide, otherwise the yield of 3 dropped dramatically, and the desired product was accompanied by 1,3-di(bicyclopropyl)urea (5) in up to 50% yield (Scheme 1). The structure of the latter was confirmed by an X-ray crystal structure analysis (Figure 1) [26].

Figure 1

Structure of 1,3-di(bicyclopropyl)urea (5) in the crystal [26].

The carbamate 3 was deprotected by treatment with hydrogen chloride in diethyl ether affording the amine hydrochloride 4·HCl in 87% yield. The latter was thus obtained from 1-bromo-1-cyclopropylcyclopropane (1) on a scale of 50 g in 42% overall yield (Scheme 1).

Conclusion

The newly developed procedure allows the preparation of 1-(cyclopropyl)cyclopropylamine (4) in five steps from commercially available methyl cyclopropanecarboxylate, reproducibly, on a 50 g and even larger scale. In this respect it is superior to the previously published and patented access to 4 from cyclopropanecarbonitrile, which in the hands of five different researchers in our laboratory required chromatographic separation of the intermediately prepared N-Boc derivative, which involved the rather costly di-tert-butyl pyrocarbonate and made that an overall three-step procedure.

Experimental

1H and 13C NMR spectra were recorded at 300 MHz [1H] and 62.9 MHz [13C, additional DEPT (Distortionless Enhancement by Polarization Transfer)] on Bruker AM 250 and Varian Mercury Vx300 instruments in CDCl3 and D2O solutions, CHCl3/CDCl3 and DHO as internal references. EI-MS, ESI-MS and HRMS spectra were measured with Finnigan MAT 95 (70 eV), Finnigan LCQ and Bruker Daltonic APEX IV 7T FTICR instruments, respectively. Melting points were determined on a Büchi 510 capillary melting point apparatus, values are uncorrected. TLC analyses were performed on precoated sheets (0.25 mm Sil G/UV254) from Macherey-Nagel). All chemicals were used as received. 1-Bromo-1-cyclopropylcyclopropane (1) was obtained according to the previously published procedure [21]. A 5.0 N solution of HCl in Et2O was prepared by saturation of anhydrous Et2O with gaseous HCl at 0 °C. Anhydrous diethyl ether was obtained by distillation from sodium benzophenone ketyl, acetone by distillation from anhydrous potassium carbonate. Anhydrous tert-butyl alcohol was obtained employing molecular sieves (4 Å) [27]. Organic extracts were dried over MgSO4. All reactions in anhydrous solvents were carried out under an argon atmosphere in flame-dried glassware.

Synthesis of 1-cyclopropylcyclopropanecarboxylic acid (2)

Under mechanical stirring and cooling with pentane/liq. N2, a solution of t-BuLi (1.7 M in pentane, 560 mL, 952.0 mmol) was added dropwise to a solution of 1-bromo-1-cyclopropylcyclopropane (1) (146.0 g, 907.0 mmol) in anhydrous Et2O (2.2 L) at −78 °C within 40 min. After stirring at −78 °C for an additional 25 min, an excess of dry ice was added in several portions (T ≤ −70 °C), and the mixture was allowed to slowly warm up to ambient temperature during a period of 2 h. The reaction was quenched with an ice-cold solution of KOH (60.0 g, 1.070 mol) in H2O (1 L), the aqueous layer was washed with ether (3 × 100 mL), and then acidified with conc. aq. HCl solution at 0–5 °C (ca. 175 mL). The resulting mixture was extracted with ether (4 × 300 mL), the combined organic phases were dried and concentrated under reduced pressure to give the acid 2 (73.2 g, 64%) as colorless crystals, mp 50–51 °C (lit. [17]: mp: 51–52 °C), which was used in the next step without further purification. Its NMR spectra were identical to the published ones [17].

Synthesis of tert-butyl 1-(cyclopropyl)cyclopropylcarbamate (3)

To a mechanically stirred solution of the acid 2 (70.60 g, ca. 560.0 mmol) in anhydrous acetone (1.7 L), was added Et3N (76.2 g, 105.0 mL, 753.0 mmol) dropwise at −5 °C. After additional stirring at this temperature for 15 min, neat ethyl chloroformate (103.7 g, 91.0 mL, 956.0 mmol) was added at the same temperature over a period of 30 min, and the resulting mixture was stirred at this temperature for an additional 2 h. Then a solution of NaN3 (75.0 g, 1.0 mol) in H2O (200 mL) was added over a period of 1.5 h. The reaction mixture was stirred at 0 °C for 1.5 h, concentrated under reduced pressure at 0 °C to about a half of the original volume, poured into ice-cold water (2 L), and the mixture extracted with diethyl ether (4 × 400 ml) and pentane (2 × 350 ml). The combined organic solutions were washed with ice-cold water (2 × 400 mL), dried under stirring with MgSO4 at 0 °C for 1 h and concentrated under reduced pressure at 0 °C/20–30 Torr. The residue was taken up with pentane (300 mL), dried and concentrated under the same conditions. It was then dissolved in anhydrous t-BuOH (200 mL), and this solution was added dropwise to anhydrous t-BuOH (1300 mL) kept at 80 °C under vigorous stirring over a period of 2.5 h. The resulting solution was heated under reflux for an additional 9 h. The main volume of t-BuOH (ca. 1300 mL) was distilled off under ambient pressure in a nitrogen flow. After cooling, the residue mixture was dried at 20 °C/0.1 Torr to give essentially pure carbamate 3 (84.0 g, 76%) as a colorless solid, mp 69–70 °C, Rf 0.38 (hexane/Et2O 5:1), which was used in the next step without further purification. 1H NMR (300 MHz, CDCl3) δ 4.91 (br s, 1H, NH), 1.39 (s, 9H, 3 CH3), 1.30–1.20 (br m, 1H, cPr-H), 0.64–0.57 (br m, 2H, cPr-H), 0.52–0.45 (br m, 2H, cPr-H), 0.37–0.31 (m, 2H, cPr-H), 0.09–0.04 (m, 2H, cPr-H); 13C NMR (62.9 MHz, CDCl3) δ 155.2 (C), 79.0 (C), 34.1 (C), 28.3 (3 CH3), 15.6 (CH), 11.9 (2 CH2), 2.6 (2 CH2); EIMS (70 eV) m/z: 141 (M+ − C4H8), 126, 96, 82, 58, 57, 43; HRMS–ESI (m/z): calcd for C11H19NNaO2, 220.1308; found, 220.1314.

Synthesis of (1-cyclopropyl)cyclopropylamine hydrochloride (4·HCl)

Under stirring, a solution of the carbamate 3 (84.0 g, 425.8 mmol) in Et2O (100 mL) was added to a ca. 5.0 N HCl solution in Et2O (700 mL) in one portion at 0 °C. The reaction mixture was stirred at 0 °C for 4 h and at ambient temperature for 20 h. The formed precipitate was filtered off, washed with Et2O (200 mL) and dried in a vacuum desiccator over P4O10 overnight to give 4·HCl (49.7 g, 87%) as a colorless powder, which slowly decomposes above ca. 135 °C and melts at 196–198 °C (dec.); 1H NMR (300 MHz, D2O) δ 1.30–1.26 (m, 1H, cPr-H), 0.71–0.60 and 0.60–0.55 (m AA'BB', 4H, cPr-H), 0.49–0.42 and 0.13–0.08 (m AA'BB', 4H, cPr-H).

When a solution of the intermediate azide in the preparation of 3 was not sufficiently dried, the thermolysis in t-BuOH along with tert-butylcarbamate 3 gave the 1,3-di(bicyclopropyl)urea (5) in up to 50% yield. Compound 5 was isolated as a colorless solid after deprotection of 3 with HCl/Et2O by evaporation of the mother liquor followed by recrystallization of the residue from hexane/CHCl3; mp 159–161 °C. The structure of 5 was confirmed by X-ray crystal structure analysis [26]. 5: 1H NMR (300 MHz, CDCl3) δ 5.21 (br s, 2H, NH), 1.28–1.16 (m, 2H, 2 CH cPr-H), 0.73–0.61 (m AA'BB', 8H, 4 CH2, cPr-H), 0.44–0.41 and 0.17–0.13 (m AA'BB', 8H, 4 CH2, cPr-H); 13C NMR (62.9 MHz, CDCl3) δ 158.8 (C), 33.9 (2 C), 15.5 (2 CH), 12.6 (2 CH2), 2.8 (6 CH2); EIMS (70 eV) m/z: 219 (M+ − H), 205 (M+ − H−CH2), 191 (M+ − H−C2H4), 124 (M+ − H−NC6H9), 96 (M+ − H−NC6H9−CO), 82 (M+ − H−NC6H9−CH2−CO).