Literature DB >> 21869790

Microbial contamination of removable prosthodontic appliances from laboratories and impact of clinical storage.

D W Williams1, N Chamary, M A O Lewis, P J Milward, R McAndrew.   

Abstract

Decontamination of dental instruments has recently been the subject of considerable debate. However, little information is available on the potential bacterial colonisation of dental appliances returning from dental laboratories and their need for decontamination. This study investigated the extent and nature of microbial contamination of removable prosthodontic appliances produced at different dental laboratories and stored in two clinical teaching units (CTU 1 and CTU 2) of a dental hospital and school. Forty consecutive dental prosthodontic appliances that were being stored under varying conditions in the two clinical teaching units were selected for study; the appliances having been produced 'in-house' (hospital laboratory) or 'out-of-house' (external commercial laboratory). Two appliances, that were known to have undergone decontamination before storage, were used as controls. Swabs were taken according to a standard protocol and transferred to the microbiological laboratory with bacterial growth expressed as colony forming units (cfu) per cm(2). Microbial sampling yielded growth from 23 (58%) of the 40 appliances studied (CTU 1, n = 22; CTU 2, n = 18), with 38% of these having a high level of contamination (>42,000 cfu/cm(2)). The predominant bacteria isolated were Bacillus spp. (57%), pseudomonads (22%) and staphylococci (13%). Fungi of the genus Candida were detected in 38% of the samples. There was no significant difference in contamination of the appliances in relation to either their place of production or the CTU (p >0.05). However, the level of contamination was significantly higher (p = 0.035) for those appliances stored in plastic bag with fluid (n = 16) compared to those stored on models (n = 19). No growth was recovered from the two appliances that had undergone decontamination before storage. The research showed that appliances received from laboratories are often contaminated and therefore there is a need for routine disinfection of such items before use and a review of storage conditions required.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 21869790     DOI: 10.1038/sj.bdj.2011.675

Source DB:  PubMed          Journal:  Br Dent J        ISSN: 0007-0610            Impact factor:   1.626


  7 in total

1.  Antimicrobial Activity of Cold Plasma Treatment on Acrylic Denture Bases: An In Vitro Evaluation.

Authors:  Mohammad Asnaashari; Salar Motamedi; Negin Asnaashari; Saranaz Azari-Marhabi
Journal:  J Lasers Med Sci       Date:  2019-12-01

Review 2.  Effects of incorporation of nanoparticles into dental acrylic resins on antimicrobial and physico-mechanical properties: A meta-analysis of in vitro studies.

Authors:  Maryam Pourhajibagher; Abbas Bahador
Journal:  J Oral Biol Craniofac Res       Date:  2022-07-20

3.  Microbial contamination of removable dental prosthesis at different interval of usage: An in vitro study.

Authors:  Vijita Vijay Nair; G N Karibasappa; Arun Dodamani; V K Prashanth
Journal:  J Indian Prosthodont Soc       Date:  2016 Oct-Dec

4.  Quantitative Analysis of Selected Microorganisms Present at Various Sites in a Prosthetics Clinic and Dental Laboratory during Complete Denture Fabrication.

Authors:  Krystle L Moodley; C Peter Owen; Mrudula Patel
Journal:  Int J Environ Res Public Health       Date:  2020-05-12       Impact factor: 3.390

5.  Durable Oral Biofilm Resistance of 3D-Printed Dental Base Polymers Containing Zwitterionic Materials.

Authors:  Jae-Sung Kwon; Ji-Yeong Kim; Utkarsh Mangal; Ji-Young Seo; Myung-Jin Lee; Jie Jin; Jae-Hun Yu; Sung-Hwan Choi
Journal:  Int J Mol Sci       Date:  2021-01-03       Impact factor: 5.923

6.  3D-Printed Nanocomposite Denture-Base Resins: Effect of ZrO2 Nanoparticles on the Mechanical and Surface Properties In Vitro.

Authors:  Ali A Alshaikh; Abdulrahman Khattar; Ibrahim A Almindil; Majed H Alsaif; Sultan Akhtar; Soban Q Khan; Mohammed M Gad
Journal:  Nanomaterials (Basel)       Date:  2022-07-18       Impact factor: 5.719

7.  Antimicrobial Properties of Silver-Modified Denture Base Resins.

Authors:  Nikola Gligorijević; Tatjana Mihajlov-Krstev; Milena Kostić; Ljubiša Nikolić; Nemanja Stanković; Vesna Nikolić; Ana Dinić; Marko Igić; Nirit Bernstein
Journal:  Nanomaterials (Basel)       Date:  2022-07-18       Impact factor: 5.719

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.