Literature DB >> 21840384

Sequential air-liquid exposure of human respiratory cells to chemical and biological pollutants.

Charles Persoz1, Christopher Leleu, Sophie Achard, Magali Fasseu, Jean Menotti, Pascale Meneceur, Isabelle Momas, Francis Derouin, Nathalie Seta.   

Abstract

Although indoor air has wide ranging effects on human health, the effects of environmental, chemical, and biological pollutants on the respiratory system are not fully understood. In order to clarify the health effects of airborne pollutant exposure, it would appear that toxicological evidence is needed to complement epidemiological observations to support by providing biological plausibility. The aim of this study is to manage air-liquid successive exposures to different pollutants such as a chemical pollutant (formaldehyde--FA), and a biological contaminant (Aspergillus fumigatus--Asp) using our in vitro model. Human alveolar cells (A549) were exposed at the air-liquid interface in an exposure module, firstly to an environmental level of FA (50 μg/m³) (or air) for 30 min, and 14 h later to Asp (7×10⁸ spores/m³) (or air) for 30 min. After 10 h post-incubation, cellular viability was assessed. Inflammation biomarkers (IL-8, MCP-1) were assayed by ELISA and by RT-PCR. Whatever the conditions, no cytotoxic effect was observed. FA followed by air exposure did not induce modification of production and expression of cytokines, confirming results with a unique FA exposure. Air followed by Asp exposure tended to induce IL-8 expression whereas IL-8 production tended to increase after FA and Asp exposure compared to FA and air exposure. The reaction of cells to sequential exposure to FA and Asp was moderate. These results show the feasibility of our model for sequential exposures to different types of environmental pollutants, allowing using it for preliminary assessment of cellular activity modification induced by airborne contaminants.
Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 21840384     DOI: 10.1016/j.toxlet.2011.07.028

Source DB:  PubMed          Journal:  Toxicol Lett        ISSN: 0378-4274            Impact factor:   4.372


  5 in total

1.  Regulating temperature and relative humidity in air-liquid interface in vitro systems eliminates cytotoxicity resulting from control air exposures.

Authors:  Jose Zavala; Rebecca Greenan; Q Todd Krantz; David M DeMarini; Mark Higuchi; M Ian Gilmour; Paul A White
Journal:  Toxicol Res (Camb)       Date:  2017-05-23       Impact factor: 3.524

Review 2.  Aerosol generation and characterization of multi-walled carbon nanotubes exposed to cells cultured at the air-liquid interface.

Authors:  William W Polk; Monita Sharma; Christie M Sayes; Jon A Hotchkiss; Amy J Clippinger
Journal:  Part Fibre Toxicol       Date:  2016-04-23       Impact factor: 9.400

3.  Development, qualification, validation and application of the Ames test using a VITROCELL® VC10® smoke exposure system.

Authors:  Kathy Fowler; Wanda Fields; Victoria Hargreaves; Lesley Reeve; Betsy Bombick
Journal:  Toxicol Rep       Date:  2018-04-12

4.  Assessment of cigarette smoke particle deposition within the Vitrocell® exposure module using quartz crystal microbalances.

Authors:  Jason Adamson; David Thorne; Annette Dalrymple; Debbie Dillon; Clive Meredith
Journal:  Chem Cent J       Date:  2013-03-12       Impact factor: 4.215

5.  Validation of an air-liquid interface toxicological set-up using Cu, Pd, and Ag well-characterized nanostructured aggregates and spheres.

Authors:  C R Svensson; S S Ameer; L Ludvigsson; N Ali; A Alhamdow; M E Messing; J Pagels; A Gudmundsson; M Bohgard; E Sanfins; M Kåredal; K Broberg; J Rissler
Journal:  J Nanopart Res       Date:  2016-03-23       Impact factor: 2.253

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.