Literature DB >> 21786040

Role of viscosity in influencing the glass-forming ability of organic molecules from the undercooled melt state.

Jared A Baird1, Darlene Santiago-Quinonez, Carlos Rinaldi, Lynne S Taylor.   

Abstract

PURPOSE: Understanding the critical factors governing the crystallization tendency of organic compounds is vital when assessing the feasibility of an amorphous formulation to improve oral bioavailability. The objective of this study was to investigate potential links between viscosity and crystallization tendency for organic compounds from the undercooled melt state.
METHODS: Steady shear rate viscosities of numerous compounds were measured using standard rheometry as a function of temperature through the undercooled melt regime. Data for each compound were fit to the Vogel-Tamman-Fulcher (VTF) equation; kinetic fragility via strength parameter (D) was determined.
RESULTS: Compounds with high crystallization tendencies exhibited lower melt viscosities than compounds with low crystallization tendencies. A correlation was observed between rate of change in viscosity with temperature and crystallization tendency, with slowly crystallizing compounds exhibiting larger increases in viscosity as temperature decreased below T(m). Calculated strength parameters indicated all compounds were kinetically fragile liquids; thus, kinetic fragility may not accurately assess glass-forming ability from undercooled melt state.
CONCLUSIONS: A link was observed between the viscosity of a compound through the undercooled melt regime and its resultant crystallization tendency, indicating viscosity is a critical parameter to fully understand crystallization tendency of organic compounds.

Mesh:

Substances:

Year:  2011        PMID: 21786040     DOI: 10.1007/s11095-011-0540-4

Source DB:  PubMed          Journal:  Pharm Res        ISSN: 0724-8741            Impact factor:   4.200


  20 in total

1.  The old problems of glass and the glass transition, and the many new twists.

Authors:  C A Angell
Journal:  Proc Natl Acad Sci U S A       Date:  1995-07-18       Impact factor: 11.205

2.  A classification system to assess the crystallization tendency of organic molecules from undercooled melts.

Authors:  Jared A Baird; Bernard Van Eerdenbrugh; Lynne S Taylor
Journal:  J Pharm Sci       Date:  2010-09       Impact factor: 3.534

3.  Fragility and thermodynamics in nonpolymeric glass-forming liquids.

Authors:  Li-Min Wang; C Austen Angell; Ranko Richert
Journal:  J Chem Phys       Date:  2006-08-21       Impact factor: 3.488

Review 4.  Pharmaceutical applications of hot-melt extrusion: part I.

Authors:  Michael M Crowley; Feng Zhang; Michael A Repka; Sridhar Thumma; Sampada B Upadhye; Sunil Kumar Battu; James W McGinity; Charles Martin
Journal:  Drug Dev Ind Pharm       Date:  2007-09       Impact factor: 3.225

5.  Rheology and molecular mobility of amorphous blends of citric acid and paracetamol.

Authors:  Pekka Hoppu; Sami Hietala; Staffan Schantz; Anne Mari Juppo
Journal:  Eur J Pharm Biopharm       Date:  2008-07-08       Impact factor: 5.571

6.  Properties of citric acid at the glass transition.

Authors:  Q Lu; G Zografi
Journal:  J Pharm Sci       Date:  1997-12       Impact factor: 3.534

7.  Clinical study of solid dispersions of itraconazole prepared by hot-stage extrusion.

Authors:  Karel Six; Tinne Daems; Jan de Hoon; Anne Van Hecken; Marleen Depre; Marie-Paule Bouche; Paul Prinsen; Geert Verreck; Jef Peeters; Marcus E Brewster; Guy Van den Mooter
Journal:  Eur J Pharm Sci       Date:  2005-02       Impact factor: 4.384

8.  A calorimetric investigation of thermodynamic and molecular mobility contributions to the physical stability of two pharmaceutical glasses.

Authors:  Deliang Zhou; David J W Grant; Geoff G Z Zhang; Devalina Law; Eric A Schmitt
Journal:  J Pharm Sci       Date:  2007-01       Impact factor: 3.534

9.  Glass transition dynamics and boiling temperatures of molecular liquids and their isomers.

Authors:  Li-Min Wang; Ranko Richert
Journal:  J Phys Chem B       Date:  2007-02-27       Impact factor: 2.991

10.  Physical stability and solubility advantage from amorphous celecoxib: the role of thermodynamic quantities and molecular mobility.

Authors:  Piyush Gupta; Garima Chawla; Arvind K Bansal
Journal:  Mol Pharm       Date:  2004 Nov-Dec       Impact factor: 4.939

View more
  6 in total

1.  Melt Extrusion of High-Dose Co-Amorphous Drug-Drug Combinations : Theme: Formulation and Manufacturing of Solid Dosage Forms Guest Editors: Tony Zhou and Tonglei Li.

Authors:  Lærke Arnfast; Md Kamruzzaman; Korbinian Löbmann; Johanna Aho; Stefania Baldursdottir; Thomas Rades; Jukka Rantanen
Journal:  Pharm Res       Date:  2017-09-19       Impact factor: 4.200

2.  Colloidal aggregation: from screening nuisance to formulation nuance.

Authors:  Ahil N Ganesh; Eric N Donders; Brian K Shoichet; Molly S Shoichet
Journal:  Nano Today       Date:  2018-03-10       Impact factor: 20.722

3.  Characterization of amorphous celecoxib mixed with plasticizing (TPGS) and anti-plasticizing (PVP) ingredients using Hot Melt Extrusion.

Authors:  Darlene Santiago; Adlin Mendoza; Zuleyka Morales; Javier Santos
Journal:  J Pharm Innov       Date:  2019-03-13       Impact factor: 2.750

4.  Long-Term Physical (In)Stability of Spray-Dried Amorphous Drugs: Relationship with Glass-Forming Ability and Physicochemical Properties.

Authors:  Khadijah Edueng; Christel A S Bergström; Johan Gråsjö; Denny Mahlin
Journal:  Pharmaceutics       Date:  2019-08-21       Impact factor: 6.321

5.  Determining Thermal Conductivity of Small Molecule Amorphous Drugs with Modulated Differential Scanning Calorimetry and Vacuum Molding Sample Preparation.

Authors:  Maximilian Karl; Jukka Rantanen; Thomas Rades
Journal:  Pharmaceutics       Date:  2019-12-10       Impact factor: 6.321

6.  Acoustic-like dynamics of amorphous drugs in the THz regime.

Authors:  E A A Pogna; C Rodríguez-Tinoco; M Krisch; J Rodríguez-Viejo; T Scopigno
Journal:  Sci Rep       Date:  2013       Impact factor: 4.379

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.