Literature DB >> 21779794

Embossing of a screw thread and TCP granules enhances the fixation strength of compressed ACL grafts with interference screws.

Mazda Farshad1, Robert A Weinert-Aplin, Michael Stalder, Peter P Koch, Jess G Snedeker, Dominik C Meyer.   

Abstract

PURPOSE: Fixation of soft tissue grafts with interference screws relies on the friction of the graft between the screw and the bone tunnel. The goal of this study was to precondition such grafts by mechanical compression in order to reduce anticipated and undesired viscoelastic adaptation of the graft to screw pressure. Further, the otherwise slippery graft surface was modified with impressed tricalcium phosphate granules (TCP) to improve friction and mechanical hold.
METHODS: Fresh flexor digitorum tendons from young bovines were used to create bundles with a diameter of 8-9 mm and were divided into 10 groups to compare the pullout strength and bone damage in a variety of construct scenarios. Specifically, the effects of graft precompression to reduce preimplantation graft diameter were investigated. Further the effects of impressing TCP granules and/or a screw thread into the tendon surface during the compression process were studied.
RESULTS: In sawbone tests, radial graft compression allowed for a smaller bone tunnel (7 mm), but resulted in a significantly lower pullout strength of 174 N (95% CI: 97, 250), compared with controls [315 N (204, 426)]. In contrast, TCP coated [402 N (243, 561)], screw embossed grafts [458 N (302, 614)], and the combination of TCP and embossing [409 N (274, 543)] achieved higher pullout strengths when compared to the standard technique. In porcine bone, untreated grafts using an 8 mm screw pulled out at 694 ± 93 N, significantly higher loads were required to pullout compressed grafts with or without TCP coating (870 ± 74 and 878 ± 131 N), yet fixed with a 7 mm screw.
CONCLUSION: Modification of the tendon graft surface has a large influence on the biomechanical performance of interference screw fixation and results in less bone damage inflicted during insertion to a smaller tunnel diameter, while simultaneously achieving superior pullout strength.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 21779794     DOI: 10.1007/s00167-011-1623-9

Source DB:  PubMed          Journal:  Knee Surg Sports Traumatol Arthrosc        ISSN: 0942-2056            Impact factor:   4.342


  19 in total

1.  Biomechanical properties of quadruple tendon and patellar tendon femoral fixation techniques.

Authors:  R Becker; D Voigt; C Stärke; M Heymann; G A Wilson; W Nebelung
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2001-06-21       Impact factor: 4.342

2.  Bone density and insertion torque as predictors of anterior cruciate ligament graft fixation strength.

Authors:  Teppo L N Järvinen; Janne T Nurmi; Harri Sievänen
Journal:  Am J Sports Med       Date:  2004-07-20       Impact factor: 6.202

3.  The fixation strength of a novel ACL soft-tissue graft fixation device compared with conventional interference screws: a biomechanical study in vitro.

Authors:  Camilla Halewood; Michael T Hirschmann; Simon Newman; Jaffar Hleihil; Gershon Chaimski; Andrew A Amis
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2010-09-14       Impact factor: 4.342

4.  The effect of interference screw diameter on fixation of soft-tissue grafts in anterior cruciate ligament reconstruction.

Authors:  Chad J Micucci; Darren A Frank; John Kompel; Matthew Muffly; Patrick J Demeo; Gregory T Altman
Journal:  Arthroscopy       Date:  2010-06-16       Impact factor: 4.772

5.  Comparison of different sizes of bioabsorbable interference screws for anterior cruciate ligament reconstruction using bioabsorbable bead augmentation in a porcine model.

Authors:  Pei-Hung Shen; Shiu-Bii Lien; Hsain-Chung Shen; Chih-Chien Wang; Guo-Shu Huang; Kuo-Hua Chao; Chian-Her Lee; Leou-Chyr Lin
Journal:  Arthroscopy       Date:  2009-10       Impact factor: 4.772

6.  Autologous patellar tendon and quadrupled hamstring grafts in anterior cruciate ligament reconstruction: a prospective randomized multicenter review of different fixation methods.

Authors:  Jon Olav Drogset; Torbjørn Strand; Gisle Uppheim; Bjørn Odegård; Asbjørn Bøe; Torbjørn Grøntvedt
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2009-12-03       Impact factor: 4.342

7.  Current techniques in anatomic anterior cruciate ligament reconstruction.

Authors:  Thore Zantop; Seiji Kubo; Wolf Petersen; Volker Musahl; Freddie H Fu
Journal:  Arthroscopy       Date:  2007-09       Impact factor: 4.772

8.  Comparison of viscoelastic, structural, and material properties of double-looped anterior cruciate ligament grafts made from bovine digital extensor and human hamstring tendons.

Authors:  T L Donahue; C Gregersen; M L Hull; S M Howell
Journal:  J Biomech Eng       Date:  2001-04       Impact factor: 2.097

9.  Primary stability of hamstring graft fixation with biodegradable suspension versus interference screws.

Authors:  Andre Weimann; Mareike Rodieck; Thore Zantop; Joachim Hassenpflug; Wolf Petersen
Journal:  Arthroscopy       Date:  2005-03       Impact factor: 4.772

10.  The use of brushite calcium phosphate cement for enhancement of bone-tendon integration in an anterior cruciate ligament reconstruction rabbit model.

Authors:  Chun-Yi Wen; Ling Qin; Kwong-Man Lee; Kai-Ming Chan
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2009-05       Impact factor: 3.368

View more
  1 in total

1.  Evaluation of Tibial Fixation Devices for Quadrupled Hamstring ACL Reconstruction.

Authors:  Elias Ammann; Andreas Hecker; Elias Bachmann; Jess G Snedeker; Sandro F Fucentese
Journal:  Orthop J Sports Med       Date:  2022-05-11
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.