Virus inactivation during coagulation with aluminum coagulants.

We used the bacteriophages Qβ and MS2 to determine whether viruses are inactivated by aluminum coagulants during the coagulation process. We performed batch coagulation and filtration experiments with virus-containing solutions. After filtering the supernatant of the coagulated solution through a membrane with a pore size of 50 nm, we measured the virus concentration by both the plaque forming unit (PFU) and polymerase chain reaction (PCR) methods. The virus concentration determined by the PFU method, which determines the infectious virus concentration, was always lower than that determined by the PCR-based method, which determines total virus concentration, regardless of infectivity. This discrepancy can be explained by the formation of aggregates consisting of several virus particles or by the inactivation of viruses in the coagulation process. The former possibility can be discounted because (i) aggregates of several virus particles would not pass through the 50-nm pores of the filtration membrane, and (ii) our particle size measurements revealed that the virus particles in the membrane filtrate were monodispersed. These observations clearly showed that non-infectious Qβ particles were present in the membrane filtrate after the coagulation process with aluminum coagulants. We subsequently revealed that the viruses lost their infectivity after being mixed with hydrolyzing aluminum species during the coagulation process.