The relationship between photocatalytic activity and photochromic state of nanoparticulate silver surface loaded titanium dioxide thin-films.

Anatase titania thin-films were prepared by a modified spray-pyrolysis method. Glass substrates were coated at room temperature with an aerosol-spray of a titania sol-gel solution and then annealed at 500 °C to form rough, transparent, crystalline thin-films of anatase TiO(2). Silver nanoparticles were deposited on the surface of these films by a photo-assisted deposition method; films were dip-coated in methanolic solutions of silver nitrate salt and then photo-irradiated for 5 h with UVC light. The AgNO(3) concentration was adjusted to create an array of films with varying silver loadings. The films displayed photochromism; changing colour to orange-brown in UV-light to colourless under white light. The rates of photochromic change, when subjected to four different lighting conditions (UVC, UVA, white light and dark), were analysed by UV-visible spectroscopy. By assessing the photocatalytic activity to these light sources it was found that the initial photochromic state of the material had a profound effect on the films photocatalytic ability. This effect was more pronounced in the more concentrated silver loaded films; where significant enhancements in photoactivity occurred when reactions were initiated from the photo-reduced state. The mode of improved photocatalysis was attributed to the photo-generated electron trapping by silver nanoparticles, which stabilised photo-generated holes and drove photo-oxidation processes. We believe this is the first study in which the relationship between the photochromic state of a thin-film and its subsequent photocatalytic activity is reported.