Literature DB >> 21684657

Revisiting the supraforaminal horizontal oblique osteotomy of the mandible.

Wolfram M H Kaduk1, Fred Podmelle, Patrick J Louis.   

Abstract

PURPOSE: Today, the most common orthognathic procedure for correction of mandibular deformities is the bilateral sagittal split osteotomy, also called sagittal ramus osteotomy. Permanent injury to the mandibular nerve (V3) is one of the main complications, with a reported incidence between 5% and 30%. Orthognathic surgery using sagittal ramus osteotomy of the mandible as the procedure of choice should be re-evaluated because of the complexity and the relatively high risk of damage to the inferior alveolar nerve. Surgical techniques that allow for accurate condylar positioning with a lower risk of inferior alveolar nerve injury should be considered. The aim of this study is to present a retrospective case series using the previously described horizontal osteotomy of the mandibular rami along with modern-day technical advances that make this procedure safe, reliable, and reproducible.
MATERIALS AND METHODS: We performed a modified approach to the supraforaminal horizontal oblique osteotomy of the mandible with a condylar positioning device, endoscopy, and a surgical navigation system. This technique was performed in 17 consecutive patients. Postoperatively, we measured the amount of surgical movement of the mandible, monitored the mandibular nerve, and evaluated bone healing during removal of the osteosynthesis plates.
RESULTS: In all 17 treated patients there was uneventful wound healing, and no patient had permanent nerve alteration. The mean movement of the mandible was 7.48 mm (SD, 2.1 mm), with a range from 3.0 to 10.5 mm. The mean follow-up was 19 months. The main purpose of the surgical navigation was the translation of the planned osteotomy line from the computed tomography scan to the surgical site during the operation. This was performed to prevent a large gap between the bone segments at the osteotomy site.
CONCLUSION: The supraforaminal approach with a condylar positioning device appears to be an appropriate way to prevent injury to the inferior alveolar nerve during orthognathic surgery of the mandible while maintaining centric positioning of the condyle and obtaining good bony union.
Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Entities:  

Mesh:

Year:  2012        PMID: 21684657     DOI: 10.1016/j.joms.2011.02.027

Source DB:  PubMed          Journal:  J Oral Maxillofac Surg        ISSN: 0278-2391            Impact factor:   1.895


  4 in total

1.  CAD/CAM Engineered Patient-Specific Impants as a Reposition Device in Le Fort I and Modified Subcondylar Osteotomies: Case Report of Facial Deformity Correction in Acromegaly.

Authors:  Juho Suojanen; Zlatan Hodzic; Tuula Palotie; Patricia Stoor
Journal:  Craniomaxillofac Trauma Reconstr       Date:  2020-07-06

2.  Comparison of two surgical techniques (HOO vs. BSSO) for mandibular osteotomies in orthognathic surgery-a 10-year retrospective study.

Authors:  Lukas B Seifert; Christopher Langhans; Yakub Berdan; Sophie Zorn; Michelle Klos; Constantin Landes; Robert Sader
Journal:  Oral Maxillofac Surg       Date:  2022-05-20

3.  Biomechanical assessment of different fixation methods in mandibular high sagittal oblique osteotomy using a three-dimensional finite element analysis model.

Authors:  Charles Savoldelli; Elodie Ehrmann; Yannick Tillier
Journal:  Sci Rep       Date:  2021-04-22       Impact factor: 4.379

4.  Revision of 116 orthognathic surgery patients operated on with the high-oblique sagittal osteotomy (HOSO): a retrospective case series (PROCESS-compliant article).

Authors:  C Herrera-Vizcaino; L Seifert; M Berdan; S Ghanaati; M Klos; C Landes; Robert Sader
Journal:  Clin Oral Investig       Date:  2020-10-26       Impact factor: 3.573

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.