Literature DB >> 21644553

Improving dielectric properties of BaTiO₃/ferroelectric polymer composites by employing surface hydroxylated BaTiO₃ nanoparticles.

Tao Zhou1, Jun-Wei Zha, Rui-Yao Cui, Ben-Hui Fan, Jin-Kai Yuan, Zhi-Min Dang.   

Abstract

Dielectric properties of poly(vinylidene fluoride) (PVDF) based nanocomposites filled with surface hydroxylated BaTiO(3) (h-BT) nanoparticles were reported. The h-BT fillers were prepared from crude BaTiO(3) (c-BT) in aqueous solution of H(2)O(2). Results showed that the dielectric properties of the h-BT/PVDF nanocomposites had weaker temperature and frequency dependences than that of c-BT/PVDF nanocomposites. Meanwhile, the h-BT/PVDF composites showed lower loss tangent and higher dielectric strength. It is suggested that the strong interaction between h-BT fillers and PVDF matrix is the main reason for the improved dielectric properties.

Entities:  

Year:  2011        PMID: 21644553     DOI: 10.1021/am200492q

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN: 1944-8244            Impact factor:   9.229


  18 in total

1.  Enhanced permittivity of negative permittivity middle-layer sandwich polymer matrix composites through conductive filling with flake MAX phase ceramics.

Authors:  Zhuo Wang; Jiahao Fan; Xu Guo; Jiamin Ji; Zixiong Sun
Journal:  RSC Adv       Date:  2020-07-20       Impact factor: 3.361

Review 2.  High-energy-density polymer dielectrics via compositional and structural tailoring for electrical energy storage.

Authors:  Rui Cheng; Yifei Wang; Rujia Men; Zhipeng Lei; Jiancheng Song; Yuanyuan Li; Meiqing Guo
Journal:  iScience       Date:  2022-08-02

3.  Fabrication of Composite Filaments with High Dielectric Permittivity for Fused Deposition 3D Printing.

Authors:  Yingwei Wu; Dmitry Isakov; Patrick S Grant
Journal:  Materials (Basel)       Date:  2017-10-23       Impact factor: 3.623

4.  Poly(vinylidene fluoride) Composite Nanofibers Containing Polyhedral Oligomeric Silsesquioxane⁻Epigallocatechin Gallate Conjugate for Bone Tissue Regeneration.

Authors:  Hyo-Geun Jeong; Yoon-Soo Han; Kyung-Hye Jung; Young-Jin Kim
Journal:  Nanomaterials (Basel)       Date:  2019-02-01       Impact factor: 5.076

5.  Surface-modified Ba(Zr0.3Ti0.7)O3 nanofibers by polyvinylpyrrolidone filler for poly(vinylidene fluoride) composites with enhanced dielectric constant and energy storage density.

Authors:  Shaohui Liu; Shuangxi Xue; Shaomei Xiu; Bo Shen; Jiwei Zhai
Journal:  Sci Rep       Date:  2016-05-17       Impact factor: 4.379

6.  Highly Dispersible Buckled Nanospring Carbon Nanotubes for Polymer Nano Composites.

Authors:  Y J Lee; S R Ham; J H Kim; T H Yoo; S R Kim; Y T Lee; D K Hwang; B Angadi; W S Seo; B K Ju; W K Choi
Journal:  Sci Rep       Date:  2018-03-19       Impact factor: 4.379

7.  Achieving high performance poly(vinylidene fluoride) dielectric composites via in situ polymerization of polypyrrole nanoparticles on hydroxylated BaTiO3 particles.

Authors:  Xu Xie; Zhen-Zhen He; Xiao-Dong Qi; Jing-Hui Yang; Yan-Zhou Lei; Yong Wang
Journal:  Chem Sci       Date:  2019-07-24       Impact factor: 9.825

8.  Poly(arylene ether nitrile) Composites with Surface-Hydroxylated Calcium Copper Titanate Particles for High-Temperature-Resistant Dielectric Applications.

Authors:  Junyi Yang; Zili Tang; Hang Yin; Yan Liu; Ling Wang; Hailong Tang; Youbing Li
Journal:  Polymers (Basel)       Date:  2019-05-01       Impact factor: 4.329

9.  Enhanced Dielectric Permittivity of Optimized Surface Modified of Barium Titanate Nanocomposites.

Authors:  Udhay Sundar; Zichen Lao; Kimberly Cook-Chennault
Journal:  Polymers (Basel)       Date:  2020-04-05       Impact factor: 4.329

10.  Investigation of Piezoelectricity and Resistivity of Surface Modified Barium Titanate Nanocomposites.

Authors:  Udhay Sundar; Zichen Lao; Kimberly Cook-Chennault
Journal:  Polymers (Basel)       Date:  2019-12-17       Impact factor: 4.329

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.