Literature DB >> 21589636

3,9-Di-tert-butyl-2,4,8,10-tetra-oxaspiro-[5.5]undeca-ne.

Zhengyi Li1, Liang Chen, Qiuzheng Tang, Xiaoqiang Sun.   

Abstract

The title compound, C(15)H(28)O(4), was prepared by the condensation of pivalaldehyde with penta-erythritol. In the crystal, the two halves of the mol-ecule are related by a crystallographic twofold rotation axis passing through the central spiro-C atom. The two non-planar six-membered heterocycles both adopt chair conformations with the two tert-butyl groups both located in the equatorial positions.

Entities:  

Year:  2010        PMID: 21589636      PMCID: PMC3011739          DOI: 10.1107/S1600536810049524

Source DB:  PubMed          Journal:  Acta Crystallogr Sect E Struct Rep Online        ISSN: 1600-5368


Related literature

For general background to spiranes, see: Cismaş et al. (2005 ▶); Mihiş et al. (2008 ▶); Sun et al. (2010 ▶).

Experimental

Crystal data

C15H28O4 M = 272.37 Monoclinic, a = 26.726 (4) Å b = 5.7894 (8) Å c = 11.2635 (15) Å β = 113.846 (4)° V = 1594.0 (4) Å3 Z = 4 Mo Kα radiation μ = 0.08 mm−1 T = 295 K 0.35 × 0.32 × 0.15 mm

Data collection

Bruker APEXII CCD diffractometer Absorption correction: multi-scan (SADABS; Bruker, 2000 ▶) T min = 0.972, T max = 0.988 4400 measured reflections 1513 independent reflections 1347 reflections with I > 2σ(I) R int = 0.019

Refinement

R[F 2 > 2σ(F 2)] = 0.042 wR(F 2) = 0.145 S = 1.03 1513 reflections 90 parameters H-atom parameters constrained Δρmax = 0.21 e Å−3 Δρmin = −0.25 e Å−3 Data collection: APEX2 (Bruker, 2000 ▶); cell refinement: SAINT (Bruker, 2000 ▶); data reduction: SAINT; program(s) used to solve structure: SHELXS97 (Sheldrick, 2008 ▶); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008 ▶); molecular graphics: SHELXTL (Sheldrick, 2008 ▶); software used to prepare material for publication: SHELXL97. Crystal structure: contains datablocks I, global. DOI: 10.1107/S1600536810049524/si2313sup1.cif Structure factors: contains datablocks I. DOI: 10.1107/S1600536810049524/si2313Isup2.hkl Additional supplementary materials: crystallographic information; 3D view; checkCIF report
C15H28O4F(000) = 600
Mr = 272.37Dx = 1.135 Mg m3
Monoclinic, C2/cMelting point = 451–452 K
Hall symbol: -C 2ycMo Kα radiation, λ = 0.71073 Å
a = 26.726 (4) ÅCell parameters from 3133 reflections
b = 5.7894 (8) Åθ = 3.1–25.8°
c = 11.2635 (15) ŵ = 0.08 mm1
β = 113.846 (4)°T = 295 K
V = 1594.0 (4) Å3Block, colorless
Z = 40.35 × 0.32 × 0.15 mm
Bruker APEXII CCD diffractometer1513 independent reflections
Radiation source: fine-focus sealed tube1347 reflections with I > 2σ(I)
graphiteRint = 0.019
φ and ω scansθmax = 25.8°, θmin = 3.3°
Absorption correction: multi-scan (SADABS; Bruker, 2000)h = −26→32
Tmin = 0.972, Tmax = 0.988k = −6→7
4400 measured reflectionsl = −13→13
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.042Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.145H-atom parameters constrained
S = 1.03w = 1/[σ2(Fo2) + (0.1P)2 + 0.4P] where P = (Fo2 + 2Fc2)/3
1513 reflections(Δ/σ)max < 0.001
90 parametersΔρmax = 0.21 e Å3
0 restraintsΔρmin = −0.25 e Å3
Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.
Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.
xyzUiso*/Ueq
C10.00000.5543 (3)0.25000.0352 (4)
C20.03372 (5)0.4010 (2)0.36479 (11)0.0457 (4)
H2A0.00940.32010.39530.055*
H2B0.05310.28650.33660.055*
C30.10728 (4)0.66075 (19)0.42765 (10)0.0374 (3)
H30.12610.55440.39180.045*
C40.03957 (4)0.7056 (2)0.21734 (10)0.0387 (3)
H4A0.05980.61050.18110.046*
H4B0.01910.81920.15270.046*
C50.14972 (5)0.7871 (2)0.54331 (11)0.0433 (3)
C60.12174 (6)0.9403 (3)0.60883 (13)0.0582 (4)
H6A0.09871.05050.54730.087*
H6B0.14901.02040.68050.087*
H6C0.10000.84620.63980.087*
C70.18565 (6)0.6080 (3)0.64011 (15)0.0683 (5)
H7A0.16340.51320.66920.102*
H7B0.21280.68550.71310.102*
H7C0.20340.51300.59880.102*
C80.18477 (6)0.9364 (3)0.49431 (15)0.0643 (4)
H8A0.19810.84360.44270.096*
H8B0.21520.99850.56700.096*
H8C0.16301.06070.44260.096*
O10.07228 (3)0.53230 (14)0.46900 (7)0.0424 (3)
O20.07695 (3)0.82062 (13)0.33090 (7)0.0382 (3)
U11U22U33U12U13U23
C10.0386 (8)0.0345 (8)0.0284 (8)0.0000.0094 (6)0.000
C20.0484 (7)0.0370 (6)0.0406 (7)−0.0019 (5)0.0065 (6)0.0047 (5)
C30.0360 (6)0.0408 (6)0.0326 (6)0.0058 (4)0.0111 (5)0.0006 (4)
C40.0391 (6)0.0486 (7)0.0266 (5)−0.0005 (5)0.0114 (5)−0.0003 (4)
C50.0410 (6)0.0457 (7)0.0337 (6)0.0034 (5)0.0052 (5)−0.0004 (5)
C60.0714 (9)0.0581 (8)0.0399 (7)0.0047 (7)0.0173 (6)−0.0101 (6)
C70.0557 (8)0.0646 (9)0.0557 (8)0.0097 (7)−0.0074 (7)0.0053 (7)
C80.0473 (7)0.0774 (11)0.0579 (9)−0.0140 (7)0.0107 (6)−0.0029 (7)
O10.0457 (5)0.0433 (5)0.0310 (5)−0.0019 (3)0.0081 (4)0.0060 (3)
O20.0382 (5)0.0424 (5)0.0296 (5)−0.0031 (3)0.0090 (4)0.0028 (3)
C1—C2i1.5261 (14)C4—H4B0.9700
C1—C21.5261 (14)C5—C61.5288 (18)
C1—C4i1.5281 (14)C5—C71.5293 (17)
C1—C41.5282 (14)C5—C81.5322 (19)
C2—O11.4281 (14)C6—H6A0.9600
C2—H2A0.9700C6—H6B0.9600
C2—H2B0.9700C6—H6C0.9600
C3—O21.4096 (12)C7—H7A0.9600
C3—O11.4132 (13)C7—H7B0.9600
C3—C51.5244 (15)C7—H7C0.9600
C3—H30.9800C8—H8A0.9600
C4—O21.4299 (13)C8—H8B0.9600
C4—H4A0.9700C8—H8C0.9600
C2i—C1—C2108.90 (12)C3—C5—C7108.66 (10)
C2i—C1—C4i107.94 (6)C6—C5—C7109.75 (11)
C2—C1—C4i111.00 (7)C3—C5—C8108.36 (10)
C2i—C1—C4111.00 (7)C6—C5—C8109.63 (11)
C2—C1—C4107.94 (6)C7—C5—C8109.89 (11)
C4i—C1—C4110.06 (13)C5—C6—H6A109.5
O1—C2—C1111.69 (9)C5—C6—H6B109.5
O1—C2—H2A109.3H6A—C6—H6B109.5
C1—C2—H2A109.3C5—C6—H6C109.5
O1—C2—H2B109.3H6A—C6—H6C109.5
C1—C2—H2B109.3H6B—C6—H6C109.5
H2A—C2—H2B107.9C5—C7—H7A109.5
O2—C3—O1110.49 (8)C5—C7—H7B109.5
O2—C3—C5110.02 (9)H7A—C7—H7B109.5
O1—C3—C5109.50 (8)C5—C7—H7C109.5
O2—C3—H3108.9H7A—C7—H7C109.5
O1—C3—H3108.9H7B—C7—H7C109.5
C5—C3—H3108.9C5—C8—H8A109.5
O2—C4—C1110.67 (7)C5—C8—H8B109.5
O2—C4—H4A109.5H8A—C8—H8B109.5
C1—C4—H4A109.5C5—C8—H8C109.5
O2—C4—H4B109.5H8A—C8—H8C109.5
C1—C4—H4B109.5H8B—C8—H8C109.5
H4A—C4—H4B108.1C3—O1—C2111.29 (8)
C3—C5—C6110.53 (10)C3—O2—C4111.17 (8)
C2i—C1—C2—O1171.24 (12)O1—C3—C5—C764.11 (12)
C4i—C1—C2—O1−70.06 (12)O2—C3—C5—C8−54.91 (12)
C4—C1—C2—O150.64 (12)O1—C3—C5—C8−176.52 (10)
C2i—C1—C4—O2−170.67 (8)O2—C3—O1—C261.88 (11)
C2—C1—C4—O2−51.39 (12)C5—C3—O1—C2−176.78 (9)
C4i—C1—C4—O269.89 (7)C1—C2—O1—C3−56.61 (11)
O2—C3—C5—C665.24 (12)O1—C3—O2—C4−63.27 (10)
O1—C3—C5—C6−56.37 (13)C5—C3—O2—C4175.71 (8)
O2—C3—C5—C7−174.28 (10)C1—C4—O2—C358.78 (11)
  2 in total

1.  A short history of SHELX.

Authors:  George M Sheldrick
Journal:  Acta Crystallogr A       Date:  2007-12-21       Impact factor: 2.290

2.  Synthesis and structure of new 3,3,9,9-tetrasubstituted-2,4,8,10-tetraoxaspiro[5.5]undecane derivatives.

Authors:  Alin Mihiş; Eric Condamine; Elena Bogdan; Anamaria Terec; Tibor Kurtán; Ion Grosu
Journal:  Molecules       Date:  2008-11-17       Impact factor: 4.411

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.