Efficacy of decontaminants and disinfectants against Clostridium difficile.

Clostridium difficile is a common nosocomial pathogen transmitted mainly via its spores. These spores can remain viable on contaminated surfaces for several months and are resistant to most commonly used cleaning agents. Thus, effective decontamination of the environment is essential in preventing the transmission of C. difficile in health-care establishments. However, this emphasis on decontamination must also be extended to laboratories due to risk of exposure of staff to potentially virulent strains. Though few cases of laboratory-acquired infection have been reported, the threat of infection by C. difficile in the laboratory is real. Our aim was to test the efficacy of four disinfectants, Actichlor, MicroSol 3+, TriGene Advance and Virkon, and one laboratory decontaminant, Decon 90, against vegetative cells and spores of C. difficile. Five strains were selected for the study: the three most commonly encountered epidemic strains in Scotland, PCR ribotypes 106, 001 and 027, and control strains 630 and VPI 10463. MICs were determined by agar dilution and broth microdilution. All the agents tested inhibited the growth of vegetative cells of the selected strains at concentrations below the recommended working concentrations. Additionally, their effect on spores was determined by exposing the spores of these strains to different concentrations of the agents for different periods of time. For some of the agents, an exposure of 10 min was required for sporicidal activity. Further, only Actichlor was able to bring about a 3 log(10) reduction in spore numbers under clean and dirty conditions. It was also the only agent that decontaminated different hard, non-porous surfaces artificially contaminated with C. difficile spores. However, this too required an exposure time of more than 2 min and up to 10 min. In conclusion, only the chlorine-releasing agent Actichlor was found to be suitable for the elimination of C. difficile spores from the environment, making it the agent of choice for the decontamination of laboratory surfaces.