Textural properties and their correlation to cell structure in porous food materials.

This paper focuses on understanding the role of structural parameters and starch crystallization on the toughness of cake samples. Accurate mechanical measurements were performed to obtain toughness values, and these were related to structural parameters obtained from image analyses. Three-dimensional skeletons of food samples were generated by using X-ray tomography technique. The structural parameters (cell diameter, cell wall thickness, thickness to radius ratio (t/R), fragmentation index) were obtained after processing of the images with CTan software. The basic hypothesis of the paper is to show that the structural parameter t/R is a determinant for predicting toughness, which is a critical indicator of freshness. Freshness in cakes and other baked products is a leading factor in consumer perception. For this purpose three different cake formulations were stored at 37 and 50 °C. Cycling from these temperatures to lower storage temperatures of 25 and 4 °C was done to accelerate the starch retrogradation rate. Experimental results indicated that there was a strong interrelationship between morphological structure and the mechanical properties with regression coefficients of 0.68 and 0.95. Starch retrogradation, which was followed by X-ray diffractometry, was found to be directly proportional to toughness values, where the percent relative crystallinity increased with storage temperature.