Kinetic analysis of stair descent: Part 1. Forwards step-over-step descent.

This study examined lower extremity biomechanics during the initiation of stair descent from an upright, static posture. Seventeen healthy subjects (aged 23±2.4 years) descended a five-step, steel-reinforced, wooden laboratory staircase (34° decline). Ten trials of stair descent were separated into two blocks of five trials. Beginning from an upright posture, subjects descended the staircase at their preferred velocity (0.53±0.082 m/s) and continued the length of the laboratory walkway (∼4 m). Joint mechanics were contrasted between gait cycles. Relative to the initiation cycle at the top of the staircase, the dissipative knee extensor (K3) and hip flexor (H2) moments and powers were independent of progression velocity and approximated steady-state (i.e., constant) values after the first cycle of the trail limb (Step 5 to Step 3). In contrast, a salient relationship was observed between progression velocity and ankle joint mechanics at initial-contact. The plantiflexor moment, power and work at initial-contact (A1) increased with centre of mass velocity. Our results demonstrate that while the knee extensor moment is the primary dissipater of mechanical energy in stair descent, the ankle plantiflexors are the primary dissipaters associated with increased progression velocity. In addition, the results show that steady-state stair descent may not be attained during the first gait cycle of the trail limb. These data shed light on locomotive strategies used in stair descent and can be applied in biomechanical models of human stair gait. Researchers and practitioners should take into consideration the influence of gait cycle and progression velocity when evaluating lower extremity function in stair descent.