| Literature DB >> 21291025 |
Jose Jimenez1, Henryk Melcer, Denny Parker, John Bratby.
Abstract
The nitrifier maximum specific growth rate, mu(A),max, is a critical parameter for the design and performance of nitrifying activated sludge systems. Although many investigations studied mu(A),max, only a few have dealt with the effect of the reactor configuration on this important kinetic parameter. Bench- and full-scale trials were devised to study the effect of the internal mixed-liquor recycle (IMLR) on the nitrifier growth rate constant. The nitrifier growth rate constant for an existing activated sludge plant was determined at different operational conditions using the high food-to-microorganism ratio (F/M) test and by process model calibration. Overall, the results obtained during this study indicate that high IMLR values have a negative effect on mu(A),max. Based on the results obtained during this investigation, a 15% decrease in mu(A),max was observed at an IMLR of 4Q or higher. It is surmised that, at high IMLRs, the reactor behavior shifts from a plug-flow configuration to a "quasi" complete-mix configuration, influencing either the species selection in activated sludge population or at least the adaptation of specific species. These results have a tremendous effect on the design of activated sludge processes that incorporate IMLR for denitrification, such as the Bardenpho, Modified Ludzack-Ettinger (MLE), University of Cape Town (UCT), and Phoredox or anaerobic-anoxic-aerobic (A2/O) processes.Entities:
Mesh:
Substances:
Year: 2011 PMID: 21291025 DOI: 10.2175/106143010x12609736967008
Source DB: PubMed Journal: Water Environ Res ISSN: 1061-4303 Impact factor: 1.946