Literature DB >> 21247614

The effects of dissolved organic matter and pH on sampling rates for polar organic chemical integrative samplers (POCIS).

Hongxia Li1, Paul A Helm, Gordon Paterson, Chris D Metcalfe.   

Abstract

The effect of solution pH and levels of dissolved organic matter (DOM) on the sampling rates for model pharmaceuticals and personal care products (PPCPs) and endocrine disrupting substance (EDS) by polar organic chemical integrative samplers (POCIS) was investigated in laboratory experiments. A commercially available POCIS configuration containing neutral Oasis HLB (hydrophilic-lipophilic balance) resin (i.e. pharmaceutical POCIS) and two POCIS configurations prepared in-house containing MAX and MCX anion and cation exchange resins, respectively were tested for uptake of 21 model PPCPs and EDS, including acidic, phenolic, basic and neutral compounds. Laboratory experiments were conducted with dechlorinated tap water over a pH range of 3, 7 and 9. The effects of DOM were studied using natural water from an oligotrophic lake in Ontario, Canada (i.e. Plastic Lake) spiked with different amounts of DOM (the concentration of dissolved organic carbon ranged from 3 to 5mgL(-1) in uptake experiments). In experiments with the commercial (HLB) POCIS, the MCX-POCIS and the MAX-POCIS, the sampling rates generally increased with pH for basic compounds and declined with pH for acidic compounds. However, the sampling rates were relatively constant across the pH range for phenols with high pKa values (i.e. bisphenol A, estrone, estradiol, triclosan) and for the neutral pharmaceutical, carbamazepine. Thus, uptake was greatest when the amount of the neutral species in solution was maximized relative to the ionized species. Although the solution pH affected the uptake of some model ionic compounds, the effect was by less than a factor of 3. There was no significant effect of DOM on sampling rates from Plastic Lake. However, uptake rates in different aqueous matrixes declined in the order of deionized water>Plastic Lake water>dechlorinated tap water, so other parameters must affect uptake into POCIS, although this influence will be minor. MAX-POCIS and MCX-POCIS showed little advantage over the commercial POCIS configuration for monitoring in natural waters.
Copyright © 2011 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2011        PMID: 21247614     DOI: 10.1016/j.chemosphere.2010.12.071

Source DB:  PubMed          Journal:  Chemosphere        ISSN: 0045-6535            Impact factor:   7.086


  11 in total

1.  Monitoring contaminants of emerging concern from tertiary wastewater treatment plants using passive sampling modelled with performance reference compounds.

Authors:  Tamanna Sultana; Craig Murray; M Ehsanul Hoque; Chris D Metcalfe
Journal:  Environ Monit Assess       Date:  2016-12-01       Impact factor: 2.513

2.  Determining the suitability of a polar organic chemical integrated sampler (POCIS) for the detection of pesticide residue in the Ishikawa River and its tributary in Osaka, Japan.

Authors:  Yoshinori Yabuki; Junko Ono; Takashi Nagai; Keiya Inao; Shinji Tanimori
Journal:  J Pestic Sci       Date:  2018-02-28       Impact factor: 1.519

3.  Monitoring of trace metals and pharmaceuticals as anthropogenic and socio-economic indicators of urban and industrial impact on surface waters.

Authors:  Y Vystavna; P Le Coustumer; F Huneau
Journal:  Environ Monit Assess       Date:  2012-09-04       Impact factor: 2.513

4.  Polar organic chemical integrative sampler (POCIS) uptake rates for 17 polar pesticides and degradation products: laboratory calibration.

Authors:  Imtiaz Ibrahim; Anne Togola; Catherine Gonzalez
Journal:  Environ Sci Pollut Res Int       Date:  2012-11-08       Impact factor: 4.223

5.  Aquatic passive sampling of perfluorinated chemicals with polar organic chemical integrative sampler and environmental factors affecting sampling rate.

Authors:  Ying Li; Cunman Yang; Yijun Bao; Xueru Ma; Guanghua Lu; Yi Li
Journal:  Environ Sci Pollut Res Int       Date:  2016-05-05       Impact factor: 4.223

6.  The application of molecularly imprinted polymers in passive sampling for selective sampling perfluorooctanesulfonic acid and perfluorooctanoic acid in water environment.

Authors:  Fengmei Cao; Lei Wang; Xinhao Ren; Fengchang Wu; Hongwen Sun; Shaoyong Lu
Journal:  Environ Sci Pollut Res Int       Date:  2018-09-26       Impact factor: 4.223

7.  Ionic liquids for the passive sampling of sulfonamides from water-applicability and selectivity study.

Authors:  Hanna Męczykowska; Paulina Kobylis; Piotr Stepnowski; Magda Caban
Journal:  Anal Bioanal Chem       Date:  2017-04-11       Impact factor: 4.142

8.  Performance of a constructed wetland in Grand Marais, Manitoba, Canada: Removal of nutrients, pharmaceuticals, and antibiotic resistance genes from municipal wastewater.

Authors:  Julie C Anderson; Jules C Carlson; Jennifer E Low; Jonathan K Challis; Charles S Wong; Charles W Knapp; Mark L Hanson
Journal:  Chem Cent J       Date:  2013-03-18       Impact factor: 4.215

Review 9.  Improving Toxicity Assessment of Pesticide Mixtures: The Use of Polar Passive Sampling Devices Extracts in Microalgae Toxicity Tests.

Authors:  Sandra Kim Tiam; Vincent Fauvelle; Soizic Morin; Nicolas Mazzella
Journal:  Front Microbiol       Date:  2016-09-09       Impact factor: 5.640

10.  Systematic Evaluation of Different Coating Chemistries Used in Thin-Film Microextraction.

Authors:  Jia-Wei Liu; Khaled Murtada; Nathaly Reyes-Garcés; Janusz Pawliszyn
Journal:  Molecules       Date:  2020-07-29       Impact factor: 4.411

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.