Literature DB >> 21144726

Biodegradability and biodegradation rate of poly(caprolactone)-starch blend and poly(butylene succinate) biodegradable polymer under aerobic and anaerobic environment.

H S Cho1, H S Moon, M Kim, K Nam, J Y Kim.   

Abstract

The biodegradability and the biodegradation rate of two kinds biodegradable polymers; poly(caprolactone) (PCL)-starch blend and poly(butylene succinate) (PBS), were investigated under both aerobic and anaerobic conditions. PCL-starch blend was easily degraded, with 88% biodegradability in 44 days under aerobic conditions, and showed a biodegradation rate of 0.07 day(-1), whereas the biodegradability of PBS was only 31% in 80 days under the same conditions, with a biodegradation rate of 0.01 day(-1). Anaerobic bacteria degraded well PCL-starch blend (i.e., 83% biodegradability for 139 days); however, its biodegradation rate was relatively slow (6.1 mL CH(4)/g-VS day) compared to that of cellulose (13.5 mL CH(4)/g-VS day), which was used as a reference material. The PBS was barely degraded under anaerobic conditions, with only 2% biodegradability in 100 days. These results were consistent with the visual changes and FE-SEM images of the two biodegradable polymers after the landfill burial test, showing that only PCL-starch blend had various sized pinholes on the surface due to attack by microorganisms. This result may be use in deciding suitable final disposal approaches of different types of biodegradable polymers in the future.
Copyright © 2010 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 21144726     DOI: 10.1016/j.wasman.2010.10.029

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  6 in total

1.  Biodegradation of poly(ε-caprolactone) (PCL) by a new Penicillium oxalicum strain DSYD05-1.

Authors:  Fan Li; Dan Yu; Xiumei Lin; Dongbo Liu; Hongmei Xia; Shan Chen
Journal:  World J Microbiol Biotechnol       Date:  2012-06-19       Impact factor: 3.312

2.  Mitigation measures to avert the impacts of plastics and microplastics in the marine environment (a review).

Authors:  Oluniyi Solomon Ogunola; Olawale Ahmed Onada; Augustine Eyiwunmi Falaye
Journal:  Environ Sci Pollut Res Int       Date:  2018-02-22       Impact factor: 4.223

3.  Two Extracellular Poly(ε-caprolactone)-Degrading Enzymes From Pseudomonas hydrolytica sp. DSWY01T: Purification, Characterization, and Gene Analysis.

Authors:  Linying Li; Xiumei Lin; Jianfeng Bao; Hongmei Xia; Fan Li
Journal:  Front Bioeng Biotechnol       Date:  2022-03-18

Review 4.  Commercial Marine-Degradable Polymers for Flexible Packaging.

Authors:  Amber Barron; Taylor D Sparks
Journal:  iScience       Date:  2020-07-09

Review 5.  Degradation of Plastics under Anaerobic Conditions: A Short Review.

Authors:  Xochitl Quecholac-Piña; María Del Consuelo Hernández-Berriel; María Del Consuelo Mañón-Salas; Rosa María Espinosa-Valdemar; Alethia Vázquez-Morillas
Journal:  Polymers (Basel)       Date:  2020-01-05       Impact factor: 4.329

6.  Antimicrobial, Antibiofilm, and Antioxidant Activity of Functional Poly(Butylene Succinate) Films Modified with Curcumin and Carvacrol.

Authors:  Łukasz Łopusiewicz; Szymon Macieja; Artur Bartkowiak; Mirosława El Fray
Journal:  Materials (Basel)       Date:  2021-12-20       Impact factor: 3.623

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.