Realization of vertical silicon nanowire networks with an ultra high density using a top-down approach.

In this paper, we demonstrate the top-down fabrication of vertical silicon nanowires networks with an ultra high density (4 x 10(10) cm(-2)), a yield of 100%, and a precise control of both diameter and location. Firstly, dense and well-defined networks of nanopillars have been patterned by e-beam lithography using a negative tone e-beam resist Hydrogen SylsesQuioxane (HSQ). A very high contrast has been obtained using a high acceleration voltage (100 kV), very small beam size at a current of 100 pA and a concentrated developer, 25% Tetramethylammonium Hydroxide. The patterns were transferred by reactive ion etching. Using chlorine based plasma chemistry and low pressure, etching anisotropy was guaranteed while avoiding the so-called 'grass effect'. This approach enabled the production of vertical silicon nanowires networks with a 20 nm diameter and a pitch of 30 nm. Lastly, the self-limited oxidation phenomenon in 1D structure has been used to perfectly control the shrinking of NWs and to obtain a Si surface free of defects induced by reactive ion etching. The silicon nanowires networks have been tapered by wet oxidation (850 degrees C) down to a diameter of 10 nm with a high aspect ratio 11.