Literature DB >> 21099154

Effects of water-storage on the physical and ultramorphological features of adhesives and primer/adhesive mixtures.

Andre F Reis1, Marcela R O Carrilho, Eduardo Ghaname, Patricia N R Pereira, Marcelo Giannini, Toru Nikaido, Junji Tagami.   

Abstract

The aims of this study were to evaluate the ultimate tensile strength (UTS) and elastic modulus (E) of adhesives, and primer/adhesive mixtures after aging for 6 months in water or oil; and to compare silver uptake patterns under the TEM. A one-step self-etching adhesive (One-up Bond F: OB), two two-step self-etching primers (SE Bond: SE and Protect Bond: CP), and two etch-and-rinse systems (Single Bond: SB and Prime&Bond NT: PB) were used. Bonding and primer solutions of self-etching systems were also mixed (SE+P and CP+P). Most adhesives presented decreased UTS after water-storage. Similar or increased UTS was observed after oil storage. Except for SB, E values did not change after water-storage, but they increased after storage in oil. OB, CP+P and SE+P presented more silver uptake. The effects of water-storage were material-dependent, and significantly affected the mechanical properties and silver uptake patterns of adhesives.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 21099154     DOI: 10.4012/dmj.2009-091

Source DB:  PubMed          Journal:  Dent Mater J        ISSN: 0287-4547            Impact factor:   2.102


  7 in total

Review 1.  Strategies to prevent hydrolytic degradation of the hybrid layer-A review.

Authors:  Leo Tjäderhane; Fabio D Nascimento; Lorenzo Breschi; Annalisa Mazzoni; Ivarne L S Tersariol; Saulo Geraldeli; Arzu Tezvergil-Mutluay; Marcela Carrilho; Ricardo M Carvalho; Franklin R Tay; David H Pashley
Journal:  Dent Mater       Date:  2013-08-14       Impact factor: 5.304

2.  Degradation of resin-dentine bond of different adhesive systems to primary and permanent dentine.

Authors:  F Z M Soares; T L Lenzi; R de Oliveira Rocha
Journal:  Eur Arch Paediatr Dent       Date:  2017-03-07

3.  Analysis of the interfacial micromorphology and bond strength of adhesive systems to Er:YAG laser-irradiated dentin.

Authors:  Marcelo Tavares de Oliveira; André Figueiredo Reis; Cesar Augusto Galvão Arrais; Andrea Nóbrega Cavalcanti; Ana Cecília Corrêa Aranha; Carlos de Paula Eduardo; Marcelo Giannini
Journal:  Lasers Med Sci       Date:  2012-08-11       Impact factor: 3.161

4.  Cytotoxicity of dimethyl sulfoxide (DMSO) in direct contact with odontoblast-like cells.

Authors:  J Hebling; L Bianchi; F G Basso; D L Scheffel; D G Soares; M R O Carrilho; D H Pashley; L Tjäderhane; C A de Souza Costa
Journal:  Dent Mater       Date:  2015-02-10       Impact factor: 5.304

5.  The use of clays for chlorhexidine controlled release as a new perspective for longer durability of dentin adhesion.

Authors:  Lívia Rodrigues de Menezes; Emerson Oliveira da Silva; Lizandra Viana Maurat da Rocha; Isabel Ferreira Barbosa; Marina Rodrigues Tavares
Journal:  J Mater Sci Mater Med       Date:  2019-11-30       Impact factor: 3.896

6.  Effect of water storage on ultimate tensile strength and mass changes of universal adhesives.

Authors:  Nazanin Bahrololumi; Amirreza Beglou; Ahmad Najafi-Abrandabadi; Alireza Sadr; Seyedeh-Mahsa Sheikh-Al-Eslamian; Amir Ghasemi
Journal:  J Clin Exp Dent       Date:  2017-01-01

7.  ZnCl2 Incorporated into Experimental Adhesives: Selected Physicochemical Properties and Resin-Dentin Bonding Stability.

Authors:  Giselle Soares Almeida; Eduardo Moreira da Silva; José Guilherme Antunes Guimarães; Rayssa Nogueira Lamego da Silva; Glauco Botelho Dos Santos; Laiza Tatiana Poskus
Journal:  Biomed Res Int       Date:  2017-11-15       Impact factor: 3.411

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.