Literature DB >> 21096878

Mechanical properties of human coronary arteries.

E Claes1, J M Atienza, G V Guinea, F J Rojo, J M Bernal, J M Revuelta, M Elices.   

Abstract

The lack of reliable mechanical data on coronary arteries and, more specifically, on their wall strength hampers the application of numerical models and simulations to vascular problems, and precludes physicians from knowing in advance the response of coronary arteries to the different interventions. Studies of the mechanical properties of coronary arteries have been carried out almost exclusively on animals. Only a few studies have tried to characterize the in vivo behavior of human coronaries through tests under physiological conditions. In this work, the mechanical properties of human coronary arteries have been characterized. Whole samples from human right (RC) and left anterior descending (LAD) coronary arteries aged between 23 and 83 years have been studied by means of in-vitro tensile testing up to failure.

Entities:  

Mesh:

Year:  2010        PMID: 21096878     DOI: 10.1109/IEMBS.2010.5627560

Source DB:  PubMed          Journal:  Annu Int Conf IEEE Eng Med Biol Soc        ISSN: 2375-7477


  13 in total

1.  Comparison of modern stroke thrombectomy approaches using an in vitro cerebrovascular occlusion model.

Authors:  M Mokin; S V Setlur Nagesh; C N Ionita; E I Levy; A H Siddiqui
Journal:  AJNR Am J Neuroradiol       Date:  2014-11-06       Impact factor: 3.825

Review 2.  Challenges in creating dissectible anatomical 3D prints for surgical teaching.

Authors:  Ratheesraj Ratinam; Michelle Quayle; John Crock; Michelle Lazarus; Quentin Fogg; Paul McMenamin
Journal:  J Anat       Date:  2019-02-01       Impact factor: 2.610

3.  A combination of experimental and numerical methods to investigate the role of strain rate on the mechanical properties and collagen fiber orientations of the healthy and atherosclerotic human coronary arteries.

Authors:  Alireza Karimi; Seyyed Mohammadali Rahmati; Toshihiro Sera; Susumu Kudo; Mahdi Navidbakhsh
Journal:  Bioengineered       Date:  2016-09-02       Impact factor: 3.269

4.  A Uniaxial Testing Approach for Consistent Failure in Vascular Tissues.

Authors: 
Journal:  J Biomech Eng       Date:  2018-06-01       Impact factor: 2.097

5.  Primary stentriever versus combined stentriever plus aspiration thrombectomy approaches: in vitro stroke model comparison.

Authors:  Maxim Mokin; Ciprian N Ionita; Swetadri Vasan Setlur Nagesh; Stephen Rudin; Elad I Levy; Adnan H Siddiqui
Journal:  J Neurointerv Surg       Date:  2014-04-30       Impact factor: 5.836

6.  A Robust Method to Generate Mechanically Anisotropic Vascular Smooth Muscle Cell Sheets for Vascular Tissue Engineering.

Authors:  Daniel E Backman; Bauer L LeSavage; Shivem B Shah; Joyce Y Wong
Journal:  Macromol Biosci       Date:  2017-02-16       Impact factor: 4.979

7.  An inverse method for mechanical characterization of heterogeneous diseased arteries using intravascular imaging.

Authors:  Bharath Narayanan; Max L Olender; David Marlevi; Elazer R Edelman; Farhad R Nezami
Journal:  Sci Rep       Date:  2021-11-18       Impact factor: 4.379

8.  Vascular Grafts with Tailored Stiffness and a Ligand Environment via Multiarmed Polymer Sheath for Expeditious Regeneration.

Authors:  Monica Iglesias-Echevarria; Richard Johnson; Michael Rafuse; Yonghui Ding; Wei Tan
Journal:  ACS Appl Bio Mater       Date:  2020-12-24

9.  A platform for high-fidelity patient-specific structural modelling of atherosclerotic arteries: from intravascular imaging to three-dimensional stress distributions.

Authors:  Karim Kadry; Max L Olender; David Marlevi; Elazer R Edelman; Farhad R Nezami
Journal:  J R Soc Interface       Date:  2021-09-29       Impact factor: 4.293

Review 10.  Changing views of the biomechanics of vulnerable plaque rupture: a review.

Authors:  Luis Cardoso; Sheldon Weinbaum
Journal:  Ann Biomed Eng       Date:  2013-07-11       Impact factor: 3.934

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.