Long-term leaching of uranium from different waste matrices.

A semi-dynamic leaching test was carried out for metallurgical wastes and ore samples from the uranium and copper mining industry over a 142 day period using distilled water and 0.1N NaNO(3) as solvents. Laser fluorimetry was used as the analytical technique to determine the total uranium content in the leachates. The cumulative leach fraction (CLF) of uranium release from the samples was calculated to be 0.22, 0.22, 0.07 and 0.39% for rock, uranium tailings, copper kinker ash samples and copper tailings respectively using distilled water as solvent and 0.31, 0.27, 0.05 and 0.59% for the same matrices using 0.1N NaNO(3). The release of mobile uranium fraction was very slow, being faster in the initial stage and then attained a near steady state condition. The diffusion coefficient and bulk release of uranium from the samples have been calculated. The processes governing the release of uranium from these matrices have been identified to be surface wash-off and diffusion. Hence the use of weak solvents (leach out the mobile/exchangeable fraction of uranium) under semi-dynamic conditions aids the determination of leaching parameters and identification of the leaching mechanism for mobile uranium fraction from different matrices by slow leaching processes. Copyright Â