Literature DB >> 21080441

Electrospun nanofibrous polycaprolactone scaffolds for tissue engineering of annulus fibrosus.

Laura Koepsell1, Lifeng Zhang, Daniel Neufeld, Hao Fong, Ying Deng.   

Abstract

The annulus fibrosus comprises concentric lamellae that can be damaged due to intervertebral disc degeneration; to provide permanent repair of these acquired structural defects, one solution is to fabricate scaffolds that are designed to support the growth of annulus fibrosus cells. In this study, electrospun nanofibrous scaffolds of polycaprolactone are fabricated in random, aligned, and round-end configurations. Primary porcine annulus fibrosus cells are grown on the scaffolds and evaluated for attachment, proliferation, and production of extracellular matrix. The scaffold consisting of round-end nanofibers substantially outperforms the random and aligned scaffolds on cell adhesion; additionally, the scaffold with aligned nanofibers strongly affects the orientation of cells.
Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 21080441     DOI: 10.1002/mabi.201000352

Source DB:  PubMed          Journal:  Macromol Biosci        ISSN: 1616-5187            Impact factor:   4.979


  12 in total

Review 1.  Biomaterials for intervertebral disc regeneration and repair.

Authors:  Robert D Bowles; Lori A Setton
Journal:  Biomaterials       Date:  2017-03-15       Impact factor: 12.479

2.  Genipin-crosslinked fibrin hydrogels as a potential adhesive to augment intervertebral disc annulus repair.

Authors:  R M Schek; A J Michalek; J C Iatridis
Journal:  Eur Cell Mater       Date:  2011-04-18       Impact factor: 3.942

Review 3.  Lumbar Intervertebral Disc Herniation: Annular Closure Devices and Key Design Requirements.

Authors:  Alexandra Alcántara Guardado; Alexander Baker; Andrew Weightman; Judith A Hoyland; Glen Cooper
Journal:  Bioengineering (Basel)       Date:  2022-01-19

Review 4.  Challenges and strategies in the repair of ruptured annulus fibrosus.

Authors:  C C Guterl; E Y See; S B G Blanquer; A Pandit; S J Ferguson; L M Benneker; D W Grijpma; D Sakai; D Eglin; M Alini; J C Iatridis; S Grad
Journal:  Eur Cell Mater       Date:  2013-01-02       Impact factor: 3.942

Review 5.  The challenge and advancement of annulus fibrosus tissue engineering.

Authors:  Li Jin; Adam L Shimmer; Xudong Li
Journal:  Eur Spine J       Date:  2013-01-30       Impact factor: 3.134

6.  3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration.

Authors:  Derek H Rosenzweig; Eric Carelli; Thomas Steffen; Peter Jarzem; Lisbet Haglund
Journal:  Int J Mol Sci       Date:  2015-07-03       Impact factor: 5.923

Review 7.  Current strategies for treatment of intervertebral disc degeneration: substitution and regeneration possibilities.

Authors:  Sebastião van Uden; Joana Silva-Correia; Joaquim Miguel Oliveira; Rui Luís Reis
Journal:  Biomater Res       Date:  2017-10-23

8.  In vitro evaluation of 3D printed polycaprolactone scaffolds with angle-ply architecture for annulus fibrosus tissue engineering.

Authors:  T R Christiani; E Baroncini; J Stanzione; A J Vernengo
Journal:  Regen Biomater       Date:  2019-04-22

9.  Tissue Engineering the Annulus Fibrosus Using 3D Rings of Electrospun PCL:PLLA Angle-Ply Nanofiber Sheets.

Authors:  Alyah H Shamsah; Sarah H Cartmell; Stephen M Richardson; Lucy A Bosworth
Journal:  Front Bioeng Biotechnol       Date:  2020-01-14

Review 10.  Strategies for Annulus Fibrosus Regeneration: From Biological Therapies to Tissue Engineering.

Authors:  Genglei Chu; Chen Shi; Huan Wang; Weidong Zhang; Huilin Yang; Bin Li
Journal:  Front Bioeng Biotechnol       Date:  2018-07-10
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.