Surface instabilities in ultrathin, cross-linked poly(N-isopropylacrylamide) coatings.

Near-the-surface instabilities with a cusplike morphology were observed in ultrathin photo-cross-linked poly(N-isopropylacrylamide) coatings upon swelling in water. The characteristic wavelength of the instability was approximately 25 times the dry thickness and scaled linearly with coating thickness between 30 and 1200 nm. Above 1200 nm, slippage of the coating along the confining substrate led to reticulated patterns with a much larger wavelength. To help interpret the origin of the instability, the coatings were also exposed to a solvent slightly worse than water (acetone) and a solvent slightly better than water (isopropanol). In all cases, the characteristic wavelength scaled linearly with respect to the swelling induced by each solvent. Both water and isopropanol produced well-defined cusps or folds in the gel surface, while acetone produced semiordered blisters that grew into one another. The features produced in acetone may be a consequence of swelling being close to the threshold value for the loss of planar stability. Through the use of a first-order linear perturbation of the Flory-Rehner model, it is shown that the emergence of a characteristic wavelength is consistent with an inhomogeneous distribution of solvent that results from diffusion of solvent into a dry coating.