Hydrocarbon versus fluorocarbon in the electrodeposition of superhydrophobic polymer films.

To elaborate on superhydrophobic surfaces, we report the electrochemical synthesis, surface morphology, and wettability of hydrocarbon conductive polymer films obtained by the electrodeposition of polythiophene, poly(3,4-ethylenedioxythiophene) (i.e., PEDOT), and poly(3,4-ethylenedioxypyrrole) (i.e., PEDOP) derivatives. Highly hydrophobic films were obtained from n-C(14)H(29) and n-C(8)H(17) chains in the cases of polythiophenes and PEDOP, respectively. By contrast, superhydrophobic films were formed by the deposition of PEDOT substituted with n-C(10)H(21) chains (PEDOT-methyl undecanoate): static contact angle ≈ 160.6°, hysteresis ≈ 2°, and sliding angle ≈ 3°. Their surface properties were compared to those of previously reported fluorinated analogues. The water-repellent properties of PEDOT-methyl undecanoate were similar to the best surface properties obtained with fluorinated monomers. Even if the main approach for the chemical factor to build up superhydrophobic surfaces is via a coating of a fluorinated compound, this work confirms that the formation of fractal surfaces is able to achieve super-anti-wetting properties within a hydrocarbon series (less expensive with a favorable ecotoxic approach), and it opens a new path to bioinspired surfaces.