Phage Langmuir monolayers and Langmuir-Blodgett films.

Stable, insoluble Langmuir monolayer films composed of Staphylococcus aureus-specific lytic bacteriophage were formed at an air-water interface and characterized. The phage monolayer was very strong, withstanding a surface pressure of ∼40 mN/m at 20 °C. The surface pressure-area (Π-A) isotherm possessed a shoulder at ∼7 × 10(4)nm(2)/phage particle, attributed to a change in phage orientation at the air-water interface from horizontal to vertical capsid-down/tail-up orientation as surface pressure was increased. The Π-A-dependence was accurately described using the Volmer equation of state, assuming horizontal orientation to an air-water interface at low surface pressures with an excluded area per phage particle of 4.6 × 10(4)nm(2). At high pressures phage particles followed the space-filling densely packed disks model with a specific area of 8.5 × 10(3)nm(2)/phage particle. Lytic phage monolayers were transferred onto gold-coated silica substrates from the air-water interface at a constant surface pressure of 18 mN/m by Langmuir-Blodgett method, then dried and analyzed by scanning electron microscopy (SEM) and ellipsometry. Phage specific adsorption (Γ) in Langmuir-Blodgett (LB) films measured by SEM was consistent with that calculated independently from Π-A isotherms at the transfer surface pressure of 18 mN/m (Γ=23 phage particles/μm(2)). The 50 nm-thickness of phage monolayer measured by ellipsometer agreed well with the horizontal phage average size estimated by SEM. Surface properties of phage Langmuir monolayer compare well with other monolayers formed from nano- and micro-particles at the air-water interface and similar to that of classic amphiphiles 1,2-diphytanoyl-sn-glycero-3-phosphocholine (phospholipid) and stearic acid.