Literature DB >> 20839883

Biodegradable elastomeric networks: highly efficient cross-linking of poly(trimethylene carbonate) by gamma irradiation in the presence of pentaerythritol triacrylate.

Erhan Bat1, Jan Feijen, Dirk W Grijpma.   

Abstract

Biodegradable elastomeric poly(trimethylene carbonate) (PTMC) networks were efficiently formed by gamma irradiating the linear polymer in the presence of pentaerythritol triacrylate (PETA). The properties of networks formed upon irradiation of PTMC films containing (0, 1, 5 wt %) PETA as a cross-linking aid were evaluated. The gel contents and network densities increased with increasing PETA contents, irradiation dose, and initial polymer molecular weights. At a dose of 25 kGy, networks with gel fractions up to 0.96 could be obtained. The networks were noncytotoxic, had elastic moduli below 10.7 MPa and high tensile strengths of up to 37.7 MPa. The incorporation of PETA also improved the resistance to creep and to tear propagation significantly, resulting in permanent set values that were as low as 0.9% strain and tear strengths up to 9.3 ± 2.0 N/mm. Furthermore, the enzymatic erosion rates of the networks could be decreased from 12.0 ± 2.9 to 3.0 ± 1.6 μm/day. These biodegradable elastomeric PTMC networks may be utilized in a broad range of medical applications.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20839883     DOI: 10.1021/bm1007234

Source DB:  PubMed          Journal:  Biomacromolecules        ISSN: 1525-7797            Impact factor:   6.988


  6 in total

1.  Biomedical Applications of Biodegradable Polymers.

Authors:  Bret D Ulery; Lakshmi S Nair; Cato T Laurencin
Journal:  J Polym Sci B Polym Phys       Date:  2011-06-15

2.  Renaissance of Aliphatic Polycarbonates: New Techniques and Biomedical Applications.

Authors:  Jianwen Xu; Ellva Feng; Jie Song
Journal:  J Appl Polym Sci       Date:  2014-03-05       Impact factor: 3.125

3.  Development of Porous and Flexible PTMC Membranes for In Vitro Organ Models Fabricated by Evaporation-Induced Phase Separation.

Authors:  Thijs Pasman; Danielle Baptista; Sander van Riet; Roman K Truckenmüller; Pieter S Hiemstra; Robbert J Rottier; Dimitrios Stamatialis; André A Poot
Journal:  Membranes (Basel)       Date:  2020-11-05

4.  Development of an In Vitro Airway Epithelial-Endothelial Cell Culture Model on a Flexible Porous Poly(Trimethylene Carbonate) Membrane Based on Calu-3 Airway Epithelial Cells and Lung Microvascular Endothelial Cells.

Authors:  Thijs Pasman; Danielle Baptista; Sander van Riet; Roman K Truckenmüller; Pieter S Hiemstra; Robbert J Rottier; Naomi M Hamelmann; Jos M J Paulusse; Dimitrios Stamatialis; André A Poot
Journal:  Membranes (Basel)       Date:  2021-03-11

5.  Versatile cross-linked fatty acid-based polycarbonate networks obtained by thiol-ene coupling reaction.

Authors:  Pierre-Luc Durand; Guillaume Chollet; Etienne Grau; Henri Cramail
Journal:  RSC Adv       Date:  2018-12-21       Impact factor: 4.036

6.  Thermal, Mechanical and Biocompatibility Analyses of Photochemically Polymerized PEGDA250 for Photopolymerization-Based Manufacturing Processes.

Authors:  Natalia Rekowska; Jennifer Huling; Andreas Brietzke; Daniela Arbeiter; Thomas Eickner; Jan Konasch; Alexander Riess; Robert Mau; Hermann Seitz; Niels Grabow; Michael Teske
Journal:  Pharmaceutics       Date:  2022-03-12       Impact factor: 6.321

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.