Literature DB >> 20815647

Viscoelastic and biomechanical properties of osteochondral tissue constructs generated from graded polycaprolactone and beta-tricalcium phosphate composites.

Cevat Erisken1, Dilhan M Kalyon, Hongjun Wang.   

Abstract

The complex micro-/nanostructure of native cartilage-to-bone insertion exhibits gradations in extracellular matrix components, leading to variations in the viscoelastic and biomechanical properties along its thickness to allow for smooth transition of loads under physiological movements. Engineering a realistic tissue for osteochondral interface would, therefore, depend on the ability to develop scaffolds with properly graded physical and chemical properties to facilitate the mimicry of the complex elegance of native tissue. In this study, polycaprolactone nanofiber scaffolds with spatially controlled concentrations of beta-tricalcium phosphate nanoparticles were fabricated using twin-screw extrusion-electrospinning process and seeded with MC3T3-E1 cells to form osteochondral tissue constructs. The objective of the study was to evaluate the linear viscoelastic and compressive properties of the native bovine osteochondral tissue and the tissue constructs formed in terms of their small-amplitude oscillatory shear, unconfined compression, and stress relaxation behavior. The native tissue, engineered tissue constructs, and unseeded scaffolds exhibited linear viscoelastic behavior for strain amplitudes less than 0.1%. Both native tissue and engineered tissue constructs demonstrated qualitatively similar gel-like behavior as determined using linear viscoelastic material functions. The normal stresses in compression determined at 10% strain for the unseeded scaffold, the tissue constructs cultured for four weeks, and the native tissue were 0.87+/-0.08 kPa, 3.59+/-0.34 kPa, and 210.80+/-8.93 kPa, respectively. Viscoelastic and biomechanical properties of the engineered tissue constructs were observed to increase with culture time reflecting the development of a tissuelike structure. These experimental findings suggest that viscoelastic material functions of the tissue constructs can provide valuable inputs for the stages of in vitro tissue development.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20815647     DOI: 10.1115/1.4001884

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  4 in total

Review 1.  Current Trends in the Evaluation of Osteochondral Lesion Treatments: Histology, Histomorphometry, and Biomechanics in Preclinical Models.

Authors:  M Maglio; S Brogini; S Pagani; G Giavaresi; M Tschon
Journal:  Biomed Res Int       Date:  2019-10-09       Impact factor: 3.411

Review 2.  Challenges on optimization of 3D-printed bone scaffolds.

Authors:  Marjan Bahraminasab
Journal:  Biomed Eng Online       Date:  2020-09-03       Impact factor: 2.819

3.  The evaluation of a multiphasic 3D-bioplotted scaffold seeded with adipose derived stem cells to repair osteochondral defects in a porcine model.

Authors:  Rachel C Nordberg; Pedro Huebner; Karl G Schuchard; Liliana F Mellor; Rohan A Shirwaiker; Elizabeth G Loboa; Jeffery T Spang
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2021-06-10       Impact factor: 3.368

4.  Investigation of multiphasic 3D-bioplotted scaffolds for site-specific chondrogenic and osteogenic differentiation of human adipose-derived stem cells for osteochondral tissue engineering applications.

Authors:  Liliana F Mellor; Rachel C Nordberg; Pedro Huebner; Mahsa Mohiti-Asli; Michael A Taylor; William Efird; Julia T Oxford; Jeffrey T Spang; Rohan A Shirwaiker; Elizabeth G Loboa
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2019-12-27       Impact factor: 3.368

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.