Assessment of the integrated urban water quality model complexity through identifiability analysis.

Urban sources of water pollution have often been cited as the primary cause of poor water quality in receiving water bodies (RWB), and recently many studies have been conducted to investigate both continuous sources, such as wastewater-treatment plant (WWTP) effluents, and intermittent sources, such as combined sewer overflows (CSOs). An urban drainage system must be considered jointly, i.e., by means of an integrated approach. However, although the benefits of an integrated approach have been widely demonstrated, several aspects have prevented its wide application, such as the scarcity of field data for not only the input and output variables but also parameters that govern intermediate stages of the system, which are useful for robust calibration. These factors, along with the high complexity level of the currently adopted approaches, introduce uncertainties in the modelling process that are not always identifiable. In this study, the identifiability analysis was applied to a complex integrated catchment: the Nocella basin (Italy). This system is characterised by two main urban areas served by two WWTPs and has a small river as the RWB. The system was simulated by employing an integrated model developed in previous studies. The main goal of the study was to assess the right number of parameters that can be estimated on the basis of data-source availability. A preliminary sensitivity analysis was undertaken to reduce the model parameters to the most sensitive ones. Subsequently, the identifiability analysis was carried out by progressively considering new data sources and assessing the added value provided by each of them. In the process, several identifiability methods were compared and some new techniques were proposed for reducing subjectivity of the analysis. The study showed the potential of the identifiability analysis for selecting the most relevant parameters in the model, thus allowing for model simplification, and in assessing the impact of data sources for model reliability, thus guiding the analyst in the design of future monitoring campaigns. Further, the analysis showed some critical points in integrated urban drainage modelling, such as the interaction between water quality processes on the catchment and in the sewer, that can prevent the identifiability of some of the related parameters.