Literature DB >> 20704471

Methods for photocrosslinking alginate hydrogel scaffolds with high cell viability.

Andrew D Rouillard1, Caroline M Berglund, Jae Youn Lee, William J Polacheck, Yvonne Tsui, Lawrence J Bonassar, Brian J Kirby.   

Abstract

Methods for seeding high-viability (>85%) three-dimensional (3D) alginate-chondrocyte hydrogel scaffolds are presented that employ photocrosslinking of methacrylate-modified alginate with the photoinitiator VA-086. Comparison with results from several other photoinitiators, including Irgacure 2959, highlights the role of solvent, ultraviolet exposure, and photoinitiator cytotoxicity on process viability of bovine chondrocytes in two-dimensional culture. The radicals generated from VA-086 photodissociation are shown to be noncytotoxic at w/v concentrations up to 1.5%, enabling photocrosslinking without significant cell death. The applicability of these photoinitiators for generating 3D tissue-engineered constructs is evaluated by measuring cell viability in 3D constructs with aggregate moduli in the 10-20 kPa range. Hydrogels with encapsulated bovine chondrocytes were constructed with >85% viability using VA-086. While the commonly used Irgacure 2959 is noncytotoxic in its native state and crosslinks the alginate at weight fractions much lower than VA-086, the cytotoxicity of IRG2959's photogenerated radical leads to viabilities below 70% in the conditions tested.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20704471     DOI: 10.1089/ten.TEC.2009.0582

Source DB:  PubMed          Journal:  Tissue Eng Part C Methods        ISSN: 1937-3384            Impact factor:   3.056


  32 in total

1.  Cytocompatible poly(ethylene glycol)-co-polycarbonate hydrogels cross-linked by copper-free, strain-promoted click chemistry.

Authors:  Jianwen Xu; Tera M Filion; Fioleda Prifti; Jie Song
Journal:  Chem Asian J       Date:  2011-08-24

2.  Dual crosslinking strategy to generate mechanically viable cell-laden printable constructs using methacrylated collagen bioinks.

Authors:  Nilabh S Kajave; Trevor Schmitt; Thuy-Uyen Nguyen; Vipuil Kishore
Journal:  Mater Sci Eng C Mater Biol Appl       Date:  2019-10-09       Impact factor: 7.328

3.  3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures.

Authors:  Sungmin Hong; Dalton Sycks; Hon Fai Chan; Shaoting Lin; Gabriel P Lopez; Farshid Guilak; Kam W Leong; Xuanhe Zhao
Journal:  Adv Mater       Date:  2015-06-01       Impact factor: 30.849

4.  Photochemically crosslinked cell-laden methacrylated collagen hydrogels with high cell viability and functionality.

Authors:  Thuy-Uyen Nguyen; Kori E Watkins; Vipuil Kishore
Journal:  J Biomed Mater Res A       Date:  2019-04-07       Impact factor: 4.396

Review 5.  Designing degradable hydrogels for orthogonal control of cell microenvironments.

Authors:  Prathamesh M Kharkar; Kristi L Kiick; April M Kloxin
Journal:  Chem Soc Rev       Date:  2013-04-22       Impact factor: 54.564

6.  Optimizing Photo-Encapsulation Viability of Heart Valve Cell Types in 3D Printable Composite Hydrogels.

Authors:  Laura Hockaday Kang; Patrick A Armstrong; Lauren Julia Lee; Bin Duan; Kevin Heeyong Kang; Jonathan Talbot Butcher
Journal:  Ann Biomed Eng       Date:  2016-04-22       Impact factor: 3.934

7.  Application of visible light-based projection stereolithography for live cell-scaffold fabrication with designed architecture.

Authors:  Hang Lin; Dongning Zhang; Peter G Alexander; Guang Yang; Jian Tan; Anthony Wai-Ming Cheng; Rocky S Tuan
Journal:  Biomaterials       Date:  2012-10-22       Impact factor: 12.479

8.  Stereolithographic printing of ionically-crosslinked alginate hydrogels for degradable biomaterials and microfluidics.

Authors:  Thomas M Valentin; Susan E Leggett; Po-Yen Chen; Jaskiranjeet K Sodhi; Lauren H Stephens; Hayley D McClintock; Jea Yun Sim; Ian Y Wong
Journal:  Lab Chip       Date:  2017-10-11       Impact factor: 6.799

9.  Cartilage tissue engineering application of injectable gelatin hydrogel with in situ visible-light-activated gelation capability in both air and aqueous solution.

Authors:  Hang Lin; Anthony Wai-Ming Cheng; Peter G Alexander; Angela M Beck; Rocky S Tuan
Journal:  Tissue Eng Part A       Date:  2014-04-09       Impact factor: 3.845

10.  An in-situ photocrosslinking microfluidic technique to generate non-spherical, cytocompatible, degradable, monodisperse alginate microgels for chondrocyte encapsulation.

Authors:  Shuo Wang; Andrew Bruning; Oju Jeon; Fei Long; Eben Alsberg; Chang Kyoung Choi
Journal:  Biomicrofluidics       Date:  2018-01-10       Impact factor: 2.800

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.