Literature DB >> 20702074

Thermal behavior of magnetically modalized poly(N-isopropylacrylamide)-chitosan based nanohydrogel.

Manish K Jaiswal1, Rinti Banerjee, Pallab Pradhan, D Bahadur.   

Abstract

Poly(NIPAAm)-CS based nanohydrogels (NHGs) and iron oxide (Fe(3)O(4)) magnetic nanoparticles encapsulated magnetic nanohydrogels (MNHGs) were synthesized by free radical polymerization of N-isopropylacrylamide (NIPAAm) at 60 degrees C in presence of chitosan (CS) in different feed ratios. The polymerization of NIPAAm and the presence of CS as well as Fe(3)O(4) in hydrogels were confirmed from Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD), respectively. (13)C solid state nuclear magnetic resonance (NMR) spectra clearly revealed the grafting of CS into poly(NIPAAm). The scanning electron microscopy (SEM) and atomic force microscopy (AFM) images showed the formation of spherical shaped NHGs of different sizes ranging from 50 nm to 200 nm depending upon the feed ratios of CS and NIPAAm, which was further supported by mean hydrodynamic diameter measured by dynamic light scattering (DLS). It has been observed that CS not only served as a cross linker during polymerization but also plays a critical role in controlling the growth of NHG and enhancement in lower critical solution temperature (LCST). The encapsulation of Fe(3)O(4) nanoparticles (10-12 nm) into NHGs ( approximately 200 nm) was confirmed by transmission electron microscopy (TEM) and further corroborated with magnetic force microscopy (MFM) image. The LCST of poly(NIPAAm) was found to increase with increasing weight ratio of CS to NIPAAm. Furthermore, the encapsulation of iron oxide nanoparticles into hydrogels also caused an increment in LCST. Specifically, temperature optimized NHG and MNHG were fabricated having LCST close to 42 degrees C (hyperthermia temperature). The MNHG shows optimal magnetization, good specific absorption rate (under external AC magnetic field) and excellent cytocompatibility with L929 cell lines, which may find potential applications in hyperthermia treatment of cancer and targeted drug delivery. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20702074     DOI: 10.1016/j.colsurfb.2010.07.009

Source DB:  PubMed          Journal:  Colloids Surf B Biointerfaces        ISSN: 0927-7765            Impact factor:   5.268


  10 in total

Review 1.  Recent progress on magnetic iron oxide nanoparticles: synthesis, surface functional strategies and biomedical applications.

Authors:  Wei Wu; Zhaohui Wu; Taekyung Yu; Changzhong Jiang; Woo-Sik Kim
Journal:  Sci Technol Adv Mater       Date:  2015-04-28       Impact factor: 8.090

2.  Enzyme-free electrochemical detection of nanomolar levels of the organophosphorus pesticide paraoxon-ethyl by using a poly(N-isopropyl acrylamide)-chitosan microgel decorated with palladium nanoparticles.

Authors:  Bhuvanenthiran Mutharani; Palraj Ranganathan; Shen-Ming Chen; Chelladurai Karuppiah
Journal:  Mikrochim Acta       Date:  2019-02-09       Impact factor: 5.833

Review 3.  Stimulus-responsive polymeric nanogels as smart drug delivery systems.

Authors:  Sakineh Hajebi; Navid Rabiee; Mojtaba Bagherzadeh; Sepideh Ahmadi; Mohammad Rabiee; Hossein Roghani-Mamaqani; Mohammadreza Tahriri; Lobat Tayebi; Michael R Hamblin
Journal:  Acta Biomater       Date:  2019-05-13       Impact factor: 8.947

4.  Thermoresponsive magnetic hydrogels as theranostic nanoconstructs.

Authors:  Manish K Jaiswal; Mrinmoy De; Stanley S Chou; Shaleen Vasavada; Reiner Bleher; Pottumarthi V Prasad; Dhirendra Bahadur; Vinayak P Dravid
Journal:  ACS Appl Mater Interfaces       Date:  2014-04-22       Impact factor: 9.229

5.  Paclitaxel and quercetin nanoparticles co-loaded in microspheres to prolong retention time for pulmonary drug delivery.

Authors:  Kang Liu; Weijuan Chen; Tingting Yang; Baofang Wen; Dejun Ding; Michael Keidar; Jinbao Tang; Weifen Zhang
Journal:  Int J Nanomedicine       Date:  2017-11-13

6.  Hyperthermia evaluation and drug/protein-controlled release using alternating magnetic field stimuli-responsive Mn-Zn ferrite composite particles.

Authors:  Wararat Montha; Weerakanya Maneeprakorn; I-Ming Tang; Weeraphat Pon-On
Journal:  RSC Adv       Date:  2020-11-04       Impact factor: 4.036

7.  Temperature- and pH-sensitive nanohydrogels of poly(N-Isopropylacrylamide) for food packaging applications: modelling the swelling-collapse behaviour.

Authors:  Clara Fuciños; Pablo Fuciños; Martín Míguez; Issa Katime; Lorenzo M Pastrana; María L Rúa
Journal:  PLoS One       Date:  2014-02-10       Impact factor: 3.240

8.  Magnetic force microscopy: quantitative issues in biomaterials.

Authors:  Daniele Passeri; Chunhua Dong; Melania Reggente; Livia Angeloni; Mario Barteri; Francesca A Scaramuzzo; Francesca De Angelis; Fiorenzo Marinelli; Flavia Antonelli; Federica Rinaldi; Carlotta Marianecci; Maria Carafa; Angela Sorbo; Daniela Sordi; Isabel Wce Arends; Marco Rossi
Journal:  Biomatter       Date:  2014-07-22

Review 9.  Magnetogels: Prospects and Main Challenges in Biomedical Applications.

Authors:  Sérgio R S Veloso; Paula M T Ferreira; J A Martins; Paulo J G Coutinho; Elisabete M S Castanheira
Journal:  Pharmaceutics       Date:  2018-09-04       Impact factor: 6.321

10.  Synthesis of Fe3O4@silica/poly(N-isopropylacrylamide) as a novel thermo-responsive system for controlled release of H3PMo12O40 nano drug in AC magnetic field.

Authors:  Javidi Jaber; Esmaeilpour Mohsen
Journal:  Colloids Surf B Biointerfaces       Date:  2012-08-24       Impact factor: 5.268

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.