Literature DB >> 20698592

LiMnPO4 nanoplate grown via solid-state reaction in molten hydrocarbon for Li-ion battery cathode.

Daiwon Choi1, Donghai Wang, In-Tae Bae, Jie Xiao, Zimin Nie, Wei Wang, Vilayanur V Viswanathan, Yun Jung Lee, Ji-Guang Zhang, Gordon L Graff, Zhenguo Yang, Jun Liu.   

Abstract

Electrochemically active LiMnPO(4) nanoplates have been synthesized via a novel, single-step, solid-state reaction in molten hydrocarbon. The olivine-structured LiMnPO(4) nanoplates with a thickness of approximately 50 nm appear porous and were formed as nanocrystals were assembled and grew into nanorods along the [010] direction in the (100) plane. After carbon coating, the prepared LiMnPO(4) cathode demonstrated a flat potential at 4.1 V versus Li with a specific capacity reaching as high as 168 mAh/g under a galvanostatic charging/discharging mode, along with an excellent cyclability.

Entities:  

Year:  2010        PMID: 20698592     DOI: 10.1021/nl1007085

Source DB:  PubMed          Journal:  Nano Lett        ISSN: 1530-6984            Impact factor:   11.189


  9 in total

1.  Inheritance of spherical morphology and optimization of assembled structures during preparation of LiMnPO4 cathodes for high electrochemical properties.

Authors:  Xiaoliang Pan; Zhi Gao; Lijun Liu; Fan Xiao; Fen Xiao; Shikun Xie; Yonghong Liu
Journal:  RSC Adv       Date:  2018-09-25       Impact factor: 4.036

2.  Heterogeneous synthesis and electrochemical performance of LiMnPO4/C composites as cathode materials of lithium ion batteries.

Authors:  Ju-Gong Zheng; Guang-Yuan Ren; Jun Shi; Ting Yang; Yue-Feng Tang; Yan-Feng Chen
Journal:  RSC Adv       Date:  2020-11-02       Impact factor: 3.361

Review 3.  Advanced Electrodes for High Power Li-ion Batteries.

Authors:  Karim Zaghib; Alain Mauger; Henri Groult; John B Goodenough; Christian M Julien
Journal:  Materials (Basel)       Date:  2013-03-15       Impact factor: 3.623

4.  Deep Eutectic Solvent Synthesis of LiMnPO₄/C Nanorods as a Cathode Material for Lithium Ion Batteries.

Authors:  Zhi Wu; Rong-Rong Huang; Hang Yu; Yong-Chun Xie; Xiao-Yan Lv; Jing Su; Yun-Fei Long; Yan-Xuan Wen
Journal:  Materials (Basel)       Date:  2017-02-06       Impact factor: 3.623

5.  A phytic acid derived LiMn0.5Fe0.5PO4/Carbon composite of high energy density for lithium rechargeable batteries.

Authors:  Yan Meng; Yujue Wang; Zhaokun Zhang; Xiaojuan Chen; Yong Guo; Dan Xiao
Journal:  Sci Rep       Date:  2019-04-30       Impact factor: 4.379

6.  Self-standing Li1.2Mn0.6Ni0.2O2/graphene membrane as a binder-free cathode for Li-ion batteries.

Authors:  Yang Puheng; Wang Wenxu; Zhang Xiaoliang; Li Honglei; Zhang Shichao; Xing Yalan
Journal:  RSC Adv       Date:  2018-11-28       Impact factor: 3.361

Review 7.  Synchrotron radiation based X-ray techniques for analysis of cathodes in Li rechargeable batteries.

Authors:  Jitendra Pal Singh; Anil Kumar Paidi; Keun Hwa Chae; Sangsul Lee; Docheon Ahn
Journal:  RSC Adv       Date:  2022-07-13       Impact factor: 4.036

8.  Morphology-Dependent Electrochemical Performance of Zinc Hexacyanoferrate Cathode for Zinc-Ion Battery.

Authors:  Leyuan Zhang; Liang Chen; Xufeng Zhou; Zhaoping Liu
Journal:  Sci Rep       Date:  2015-12-16       Impact factor: 4.379

9.  LiCoPO4 cathode from a CoHPO4·xH2O nanoplate precursor for high voltage Li-ion batteries.

Authors:  Daiwon Choi; Xiaolin Li; Wesley A Henderson; Qian Huang; Satish K Nune; John P Lemmon; Vincent L Sprenkle
Journal:  Heliyon       Date:  2016-02-26
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.