Literature DB >> 20694975

Endothelialization of PVA/gelatin cryogels for vascular tissue engineering: effect of disturbed shear stress conditions.

Nihal Engin Vrana1, Paul A Cahill, Garrett B McGuinness.   

Abstract

Mechanically, poly(vinyl alcohol) (PVA)-based cryogels are extremely well suited for vascular tissue engineering applications. However, their surface properties lead to a slow rate of endothelialization, and the mode of cell attachment leaves the endothelium susceptible to removal under physiological shear stress conditions. In this study, abrupt and ramped disturbed shear stress conditions created by a turbulent orbital flow were used to examine endothelialization on PVA/gelatin cryogels. Cell proliferation rate and apoptosis were evaluated by fluorescent activated cell sorter (FACS) analysis, and the expression of cell-adhesion molecules was used to evaluate the response of cells on cryogels to static and shear conditions by real-time polymerase chain reaction (RT-PCR). Application of a ramped shear stress had a profound effect on endothelial cell proliferation (22.30 +/- 0.20-fold increase), necrosis (eliminated), apoptosis (1.04 +/- 0.18 increase), and overall facilitation of endothelialization while concomitantly increasing nitric oxide (NO) synthesis levels. Ramped shear stress was also effective in helping the retention of the endothelial cells on the cryogel surface, whereas abrupt application caused widespread removal. Under static conditions, Selectin-P expression decreased, whereas both inter-cellular adhesion molecule (ICAM) and platelet endothelial cell adhesion molecule (PECAM)-I expression increased on cryogels over a 10-day culture period. Under both shear stress conditions, Selectin-P expression was decreased both on cryogels and tissue culture polystyrene (TCPS). Controlled application of disturbed shear stress shortens endothelialization times on cryogel surfaces, in contrast to the established antiproliferative effect of shear stress caused by laminar flow, without compromising their functionality. This demonstrates how such mechanical stimuli can be exploited to alter cellular behavior and facilitate the required outcomes for tissue engineering applications. (c) 2010 Wiley Periodicals, Inc.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20694975     DOI: 10.1002/jbm.a.32790

Source DB:  PubMed          Journal:  J Biomed Mater Res A        ISSN: 1549-3296            Impact factor:   4.396


  5 in total

Review 1.  Cell microenvironment engineering and monitoring for tissue engineering and regenerative medicine: the recent advances.

Authors:  Julien Barthes; Hayriye Özçelik; Mathilde Hindié; Albana Ndreu-Halili; Anwarul Hasan; Nihal Engin Vrana
Journal:  Biomed Res Int       Date:  2014-07-20       Impact factor: 3.411

2.  Evaluation of Fibrin-Based Interpenetrating Polymer Networks as Potential Biomaterials for Tissue Engineering.

Authors:  Olfat Gsib; Jean-Luc Duval; Mathieu Goczkowski; Marie Deneufchatel; Odile Fichet; Véronique Larreta-Garde; Sidi Ahmed Bencherif; Christophe Egles
Journal:  Nanomaterials (Basel)       Date:  2017-12-10       Impact factor: 5.076

Review 3.  Cellulose Cryogels as Promising Materials for Biomedical Applications.

Authors:  Irina V Tyshkunova; Daria N Poshina; Yury A Skorik
Journal:  Int J Mol Sci       Date:  2022-02-12       Impact factor: 5.923

4.  Design and Simulation of the Biomechanics of Multi-Layered Composite Poly(Vinyl Alcohol) Coronary Artery Grafts.

Authors:  Katie L Fegan; Naomi C Green; Melanie M Britton; Asif J Iqbal; Lauren E J Thomas-Seale
Journal:  Front Cardiovasc Med       Date:  2022-06-24

5.  Pullulan/Poly(Vinyl Alcohol) Composite Hydrogels for Adipose Tissue Engineering.

Authors:  Iuliana Samoila; Sorina Dinescu; Gratiela Gradisteanu Pircalabioru; Luminita Marutescu; Gheorghe Fundueanu; Magdalena Aflori; Marieta Constantin
Journal:  Materials (Basel)       Date:  2019-10-01       Impact factor: 3.623

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.