Literature DB >> 2066892

The fungicidal effect of ultraviolet light on impression materials.

H Ishida1, Y Nahara, M Tamamoto, T Hamada.   

Abstract

The effects of ultraviolet (UV) light on fungi and impression materials were tested. UV light (250 microW/cm2) killed most Candida organisms (10(3) cells/ml) within 5 minutes. UV light (8000 microW/cm2) killed most C. albicans (10(7) cells/ml) within 2 minutes of exposure. The effect of UV light on dimensional change and surface roughness of impression materials (irreversible hydrocolloid, agar, and silicone rubber) was tested. The results showed that neither dimensional change nor surface roughness of the impression materials were affected. The results of this study indicate that UV light disinfects impression materials that are contaminated with Candida organisms.

Entities:  

Mesh：

Substances：

Year:  1991        PMID： 2066892     DOI： 10.1016/0022-3913(91)90295-8

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  9 in total

1.  Efficacy of different disinfectant systems on alginate and addition silicone impression materials of Indian and international origin: a comparative evaluation.

Authors:  R K Samra; S V Bhide
Journal:  J Indian Prosthodont Soc       Date:  2011-01-19

2.  Disinfection of Impression Materials with Glutaraldehyde, Ultraviolet Radiation, and Autoclave: A Comparative Study.

Authors:  Monica Kotwal; Vishal Partap Singh; Humaira Mushtaq; Rimsha Ahmed; Gaurav Rai; Amit Kumar
Journal:  J Pharm Bioallied Sci       Date:  2021-06-05

3.  Quantitative investigation of efficiency of ultraviolet and visible light in eradication of Candida albicans in vitro.

Authors:  Dubravko Risović; Mirela Maver-Bišćanin; Marinka Mravak-Stipetić; Suzana Bukovski; Alen Bišćanin
Journal:  Photomed Laser Surg       Date:  2014-04       Impact factor: 2.796

4.  In vitro bactericidal effects of 625, 525, and 425 nm wavelength (red, green, and blue) light-emitting diode irradiation.

Authors:  SangWoo Kim; Jisun Kim; WonBong Lim; SangMi Jeon; OkSu Kim; Jeong-Tae Koh; Chang-Su Kim; HongRan Choi; OkJoon Kim
Journal:  Photomed Laser Surg       Date:  2013-10-19       Impact factor: 2.796

5.  Comparative evaluation of dimensional stability of impression materials from developing countries and developed countries after disinfection with different immersion disinfectant systems and ultraviolet chamber.

Authors:  Rupandeep Kaur Samra; Shreenivas Vasant Bhide
Journal:  Saudi Dent J       Date:  2017-12-13

6.  A comparative evaluation of disinfection effect of exposures to ultra-violet light and direct current glow discharge on Candida Albicans colonies coated over elastomeric impression material: An in vitro study.

Authors:  Vijay Anand
Journal:  J Pharm Bioallied Sci       Date:  2013-06

7.  In vitro antifungal evaluation of seven different disinfectants on acrylic resins.

Authors:  A Z Yildirim-Bicer; I Peker; G Akca; I Celik
Journal:  Biomed Res Int       Date:  2014-06-05       Impact factor: 3.411

8.  Comparative Evaluation of the Effect of Chemical Disinfectants and Ultraviolet Disinfection on Dimensional Stability of the Polyvinyl Siloxane Impressions.

Authors:  Sharayu Vinod Nimonkar; Vikram M Belkhode; S R Godbole; Pranali Vinod Nimonkar; Trupti Dahane; Seema Sathe
Journal:  J Int Soc Prev Community Dent       Date:  2019-04-12

Review 9.  Disinfection Procedures and Their Effect on the Microorganism Colonization of Dental Impression Materials: A Systematic Review and Meta-Analysis of In Vitro Studies.

Authors:  Louis Hardan; Rim Bourgi; Carlos Enrique Cuevas-Suárez; Monika Lukomska-Szymanska; Elizabeth Cornejo-Ríos; Vincenzo Tosco; Riccardo Monterubbianesi; Sara Mancino; Ammar Eid; Davide Mancino; Naji Kharouf; Youssef Haikel
Journal:  Bioengineering (Basel)       Date:  2022-03-16
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.