Literature DB >> 20654767

Two-body wear of different ceramic materials opposed to zirconia ceramic.

Zakereyya S M Albashaireh1, Muhamad Ghazal, Matthias Kern.   

Abstract

STATEMENT OF PROBLEM: Little is known about the wear behavior of ceramics opposed to unveneered zirconia and whether wear varies according to microstructure, surface toughness, and flexural strength of the ceramics.
PURPOSE: The purpose of this study was to evaluate the 2-body wear resistance of 5 ceramics opposing unveneered zirconia ceramic.
MATERIAL AND METHODS: Yttrium-stabilized zirconia, lithium disilicate glass ceramic, leucite-reinforced glass ceramic, fluorapatite glass ceramic, and nanofluorapatite glass ceramic specimens (n=8) were tested against standardized zirconia balls. Wear tests were performed in a dual-axis mastication simulator. Wear resistance was calculated by measuring the vertical and volumetric substance loss using a laser scanner. Specimen surfaces were evaluated at x50 and x500 magnification using SEM. Data were statistically analyzed using 1-way ANOVA and Fisher's exact test (alpha=.05).
RESULTS: Zirconia specimens demonstrated significantly lower vertical and volumetric loss than other ceramics (P<.05). The wear of fluorapatite and nanofluorapatite glass ceramics was significantly greater than that of leucite-reinforced and lithium disilicate glass ceramics (P<.05). SEM images showed no cracks or flaws in the zirconia and leucite-reinforced glass-ceramic specimens, indicating a mixture of attritional and adhesive wear. Other ceramic specimens exhibited cracks and chipped particle spaces which were consistent with fatigue wear. Zirconia demonstrated the lowest vertical and volumetric wear values. Leucite-reinforced and lithium disilicate glass ceramics demonstrated nonsignificant differences in volumetric wear, but these values were significantly lower than those observed for nanofluorapatite and fluorapatite glass ceramics (P<.05).
CONCLUSIONS: Wear varied according to the structure of the ceramic tested. Wear was of the fatigue type, and was significantly lowest in the zirconia specimens tested. (c) 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20654767     DOI: 10.1016/S0022-3913(10)60102-3

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  14 in total

1.  Two-body wear of dental porcelain and substructure oxide ceramics.

Authors:  Martin Rosentritt; Verena Preis; Michael Behr; Sebastian Hahnel; Gerhard Handel; Carola Kolbeck
Journal:  Clin Oral Investig       Date:  2011-07-08       Impact factor: 3.573

2.  The effect of abrading and cutting instruments on machinability of dental ceramics.

Authors:  Satoshi Sakoda; Noriko Nakao; Ikuya Watanabe
Journal:  J Mater Sci Mater Med       Date:  2018-03-16       Impact factor: 3.896

3.  Wear of ceramic-based dental materials.

Authors:  Oscar Borrero-Lopez; Fernando Guiberteau; Yu Zhang; Brian R Lawn
Journal:  J Mech Behav Biomed Mater       Date:  2019-01-12

4.  The zirconia ceramic: strengths and weaknesses.

Authors:  Elie E Daou
Journal:  Open Dent J       Date:  2014-04-18

Review 5.  The effect of surface roughness on ceramics used in dentistry: A review of literature.

Authors:  Haroon Rashid
Journal:  Eur J Dent       Date:  2014-10

6.  Esthetic Prosthetic Restorations: Reliability and Effects on Antagonist Dentition.

Authors:  Elie E Daou
Journal:  Open Dent J       Date:  2015-12-31

7.  In vitro wear behavior between enamel cusp and three aesthetic restorative materials: Zirconia, porcelain, and composite resin.

Authors:  Yong-Seok Jang; Thuy-Duong Thi Nguyen; Young-Han Ko; Dae-Woo Lee; Byeong Ju Baik; Min-Ho Lee; Tae-Sung Bae
Journal:  J Adv Prosthodont       Date:  2019-02-26       Impact factor: 1.904

8.  Clinical performance of a new biomimetic double network material.

Authors:  Christine Dirxen; Uwe Blunck; Saskia Preissner
Journal:  Open Dent J       Date:  2013-09-06

Review 9.  Tooth wear against ceramic crowns in posterior region: a systematic literature review.

Authors:  Rim Hmaidouch; Paul Weigl
Journal:  Int J Oral Sci       Date:  2013-10-18       Impact factor: 6.344

10.  Wear of primary teeth caused by opposed all-ceramic or stainless steel crowns.

Authors:  Jae-Won Choi; Ik-Hyun Bae; Tae-Hwan Noh; Sung-Won Ju; Tae-Kyoung Lee; Jin-Soo Ahn; Tae-Sung Jeong; Jung-Bo Huh
Journal:  J Adv Prosthodont       Date:  2016-02-23       Impact factor: 1.904

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.