BACKGROUND, AIM, AND SCOPE: Solid surfaces in contact with water have been found to be biofouled due to the attachment of various organisms. For better understanding of the biofilm formation, the important initial stage of bacterial attachment was investigated with Pseudomonas aeruginosa PAO1 as a model microorganism. Effects of the biosurfactant rhamnolipids and the shear conditions were particularly examined. MATERIALS AND METHODS: A highly reproducible procedure was employed. The procedure involved monitoring and counting the number of attached cells on glass walls of the flow chambers, through which a PAO1 suspension was circulated and, subsequently, a saline solution was passed for washing. The experiments were made under different circulation rates (exerting different shear on the bacteria) and rhamnolipid concentrations. RESULTS AND DISCUSSIONS: Reproducibility of the procedure was confirmed. The velocity profiles near the flow chamber wall were determined. Rhamnolipids, even at a very low concentration of 13 mg/l, were found to deter the bacterial attachment substantially. Prewashing the cells with a 100 mg/l rhamnolipid solution, however, did not affect the attachment significantly. As for the effect of shear, the PAO1 attachment showed an increasing-then-decreasing trend in the range investigated, i.e., 1.0 to 26 mN/m(2) shear stresses at the chamber wall. The diffusion-limited transport of cells to the chamber wall might have contributed to, but could not fully explain, the increasing attachment observed in the very low shear range (up to 3.5-5.0 mN/m(2)). CONCLUSIONS: As compared to static systems, the flow chamber systems significantly improved the reproducibility of initial attachment results. Flow chamber systems were more suitable for experimental investigations of bacterial attachment to surfaces. Rhamnolipids were found to be potent antifoulants for PAO1 attachment on glass. The initial cell attachment increased with increasing shear at the very low shear range (up to 3.5-5.0 mN/m(2)), but the attachment could be minimized with further increase of the shear.
BACKGROUND, AIM, AND SCOPE: Solid surfaces in contact with water have been found to be biofouled due to the attachment of various organisms. For better understanding of the biofilm formation, the important initial stage of bacterial attachment was investigated with Pseudomonas aeruginosa PAO1 as a model microorganism. Effects of the biosurfactant rhamnolipids and the shear conditions were particularly examined. MATERIALS AND METHODS: A highly reproducible procedure was employed. The procedure involved monitoring and counting the number of attached cells on glass walls of the flow chambers, through which a PAO1 suspension was circulated and, subsequently, a saline solution was passed for washing. The experiments were made under different circulation rates (exerting different shear on the bacteria) and rhamnolipid concentrations. RESULTS AND DISCUSSIONS: Reproducibility of the procedure was confirmed. The velocity profiles near the flow chamber wall were determined. Rhamnolipids, even at a very low concentration of 13 mg/l, were found to deter the bacterial attachment substantially. Prewashing the cells with a 100 mg/l rhamnolipid solution, however, did not affect the attachment significantly. As for the effect of shear, the PAO1 attachment showed an increasing-then-decreasing trend in the range investigated, i.e., 1.0 to 26 mN/m(2) shear stresses at the chamber wall. The diffusion-limited transport of cells to the chamber wall might have contributed to, but could not fully explain, the increasing attachment observed in the very low shear range (up to 3.5-5.0 mN/m(2)). CONCLUSIONS: As compared to static systems, the flow chamber systems significantly improved the reproducibility of initial attachment results. Flow chamber systems were more suitable for experimental investigations of bacterial attachment to surfaces. Rhamnolipids were found to be potent antifoulants for PAO1 attachment on glass. The initial cell attachment increased with increasing shear at the very low shear range (up to 3.5-5.0 mN/m(2)), but the attachment could be minimized with further increase of the shear.
Authors: Leonardo De La Fuente; Emilie Montanes; Yizhi Meng; Yaxin Li; Thomas J Burr; H C Hoch; Mingming Wu Journal: Appl Environ Microbiol Date: 2007-02-09 Impact factor: 4.792
Authors: Olga Yakovenko; Jamie Nunez; Barbara Bensing; Hai Yu; Jonathan Mount; Jie Zeng; Jasmine Hawkins; Xi Chen; Paul M Sullam; Wendy Thomas Journal: Infect Immun Date: 2018-05-22 Impact factor: 3.441
Authors: Yun Shen; Guillermo L Monroy; Nicolas Derlon; Dao Janjaroen; Conghui Huang; Eberhard Morgenroth; Stephen A Boppart; Nicholas J Ashbolt; Wen-Tso Liu; Thanh H Nguyen Journal: Environ Sci Technol Date: 2015-03-11 Impact factor: 9.028
Authors: Olga Maťátková; Irena Kolouchová; Kristýna Lokočová; Jana Michailidu; Petr Jaroš; Markéta Kulišová; Tomáš Řezanka; Jan Masák Journal: Biomolecules Date: 2021-11-19